Healing of Fatigue Crack in 1045 Steel by Using Eddy Current Treatment
نویسندگان
چکیده
In order to investigate the methods to heal fatigue cracks in metals, tubular specimens of 1045 steel with axial and radial fatigue cracks were treated under the eddy current. The optical microscope was employed to examine the change of fatigue cracks of specimens before and after the eddy current treatment. The results show that the fatigue cracks along the axial direction of the specimen could be healed effectively in the fatigue crack initiation zone and the crack tip zone under the eddy current treatment, and the healing could occur within a very short time. The voltage breakdown and the transient thermal compressive stress caused by the detouring of eddy current around the fatigue crack were the main factors contributing to the healing in the fatigue crack initiation zone and the crack tip zone, respectively. Eddy current treatment may be a novel and effective method for crack healing.
منابع مشابه
Effects of Pretreatment Prior to Electroless Ni-P Plating on Fatigue Behavior of SAE 1045 Steel
Electroless Ni-P (EN) plating, as an important group of metallic coatings, employed in a wide range of industrial applications. The current work aims to investigate the effects of pretreatment process before EN plating on fatigue behavior of SAE 1045 steel. The specimens of rotating bending fatigue test were prepared from the steel in two series. A group of samples used in as-polished con...
متن کاملEffect of Heat Treatment on Fatigue Behavior of (A193-51T-B7) Alloy Steel
This research comprises a study of the effect of heat treatment on fatigue behavior of (A193-51T-B7) alloy steel. Two heat treatment processes were conducted, namely, annealing and quenching followed by tempering at 200C. All fatigue tests were carried out using a rotary bending machine with constant stress ratio, R=-1. The eddy current probe was used to measure the crack length propagation. Fr...
متن کاملQuantitative measuring of pearlite in carbon steels using electromagnetic sensor
Non-destructive Eddy current (EC) technique has long been used to detect discontinuities in materials. Recently, its application has been extended to characterize materials microstructure. In order to identify different microstructures, four plain carbon steel bars with different chemical compositions (AISI 1015, 1035, 1045 and 1080) were used in annealed condition. The pearlite percentage, car...
متن کاملFatigue Behavior Optimization of the 16MnCr5 Steel Used in Machine Tool Spindle via Different Surface Treatments
Since the sub-axis of machine tool spindles subjected to fatigue loading, the effects of different surface heat treatments on fatigue behavior of 16MnCr5 steel have been investigated in the current work. After the test specimens were prepared from the steel, the surface heat treatments; carburizing, carbonitriding and a practical type of treatment involving the first nitriding then carburizing ...
متن کاملHealing of Fatigue Crack by High-Density Electropulsing in Austenitic Stainless Steel Treated with the Surface-Activated Pre-Coating
A technique to heal a fatigue crack in austenitic stainless steel SUS316 by applying a controlled, high-density pulsed current was developed. A surface-activated pre-coating (SAPC), which eliminates the oxide layer and coats a Ni film on the crack surface, was used to improve the adhesion between crack surfaces. Cracks were observed by scanning electron microscopy before and after the applicati...
متن کامل