Review on thermal energy storage with phase change materials and applications
نویسنده
چکیده
The use of a latent heat storage system using phase change materials (PCMs) is an effective way of storing thermal energy and has the advantages of high-energy storage density and the isothermal nature of the storage process. PCMs have been widely used in latent heat thermalstorage systems for heat pumps, solar engineering, and spacecraft thermal control applications. The uses of PCMs for heating and cooling applications for buildings have been investigated within the past decade. There are large numbers of PCMs that melt and solidify at a wide range of temperatures, making them attractive in a number of applications. This paper also summarizes the investigation and analysis of the available thermal energy storage systems incorporating PCMs for use in different applications. # 2007 Elsevier Ltd. All rights reserved.
منابع مشابه
A Comprehensive Study on a Latent Heat Thermal Energy Storage System and its Feasible Applications in Greenhouses
Abstract Energy crisis is a major challenge in the current world. Latent heat thermal energy storage (LHTES) systems are known as equipment with promising performance by which thermal energy can be recovered. In the present study a comprehensive theoretical and experimental investigation is performed on a LHTES system containing PEG1000 as phase change material (PCM). Discussed topics can be ca...
متن کاملExperimental and Numerical Investigations on Al2O3–Tricosane Based Heat Pipe Thermal Energy Storage
The enhancement of operating life cycle of electronic devices necessitates the development of efficient cooling techniques. Therefore, in the present work the effects of employment of Phase Change Material, in the adiabatic section of heat pipe for electronic cooling applications were experimentally and numerically investigated. Tricosane (100 ml) is chosen as PCM in this study, where Al2O3 nan...
متن کاملMicroencapsulation of Butyl Palmitate in Polystyrene-co-Methyl Methacrylate Shell for Thermal Energy Storage Application
MicroEncapsulated Phase Change Materials (MEPCM) are green materials which could be used for thermal energy saving applications in buildings as a non-pollutant method for environmental. PCMs could passively reduce peak cooling loads in hot seasons because of their high energy storage capacities at a constant temperature. Purpose of this paper is manufacturing Microencapsulated PCM (MPCM) pr...
متن کاملTransient Two-Dimensional (r-z) Cyclic Charging/Discharging Analysis of Space Thermal Energy Storage Systems (RESEARCH NOTE)
A two-dimensional transient axi-symmetric model was developed to study the effects of various thermal and geometric parameters on cyclic heating and cooling modes of a phase-change thermal energy storage system. The high-temperature thermal energy storage device utilizes LiH for heat sink applications to store the waste heat generated during power-burst periods. The stored heat is then discharg...
متن کاملImprovement of thermal performance of a solar chimney based on a passive solar heating system with phase-change materials
Passive solar systems such as solar chimneys need solar radiation in order to work. Therefore, they cannot present stable natural ventilation when solar energy vanishes: to have a more robust and stable condition, solar energy should be stored during the day and released back during the night. Phase change materials can save additional thermal energy during the day and release it during the...
متن کاملImprovement of thermal performance of a solar chimney based on a passive solar heating system with phase-change materials
Passive solar systems such as solar chimneys need solar radiation in order to work. Therefore, they cannot present stable natural ventilation when solar energy vanishes: to have a more robust and stable condition, solar energy should be stored during the day and released back during the night. Phase change materials can save additional thermal energy during the day and release it during the nig...
متن کامل