The Design of PTAT Voltage Generator Using SCM and ACM
نویسندگان
چکیده
The design of PTAT generator using SCM and ACM is described in this paper. The PTAT voltage generator is created using the self cascade MOSFET .the SCM is fairly based on the advanced compact MOSFET which works on the inversion methodology in which the current is the main variable. The PTAT voltage generator is designed using cadence in 90nm technology whose operating voltage is 1.1v the PTAT voltage generator produces an output of 581.839mv and consumes an average power of 500μw.the created PTAT voltage can be added with a CTAT voltage to get the bandgap reference which can be used for low power applications. Keywords-low power, PTAT voltage generator, CTAT, ACM, Self cascade MOSFET
منابع مشابه
PTAT Voltage Generator based on an MOS Voltage Divider
An MOS-only, proportional to absolute temperature (PTAT) voltage generator capable of operation in the whole range of inversion levels is presented. We perform a theoretical analysis based on the ACM model which is successfully compared to experimental data. PTAT voltages up to hundreds of milivolts at room temperature can be easily obtained.
متن کاملLow-power temperature-to-frequency converter consisting of subthreshold CMOS circuits for integrated smart temperature sensors
A low-power temperature-sensing oscillator was developed using a 0.35m standard CMOS process. This oscillator generates a clock pulse whose frequency is proportional to absolute temperature (PTAT frequency). It consists of a PTAT current generator controlled with an external reference clock and a frequency-locked loop biased with an external reference voltage. The PTAT current generator makes u...
متن کاملRobust Controller Design for IG Driven by Variable-Speed in WECS Using μ-Synthesis
This paper presents robust controller design for a wind-driven induction generator system using structured singular value ( -synthesis) method. The controller was designed for a static synchronous compensator (STATCOM) and a variable blade pitch angle in a wind energy conversion system (WECS) in order to achieve the required voltage and mechanical power control. The results indicated that this ...
متن کاملSliding-Mode-based Improved Direct Active and Reactive Power Control of Doubly Fed Induction Generator under Unbalanced Grid Voltage Condition
This paper proposes an improved direct active and reactive power control (DPC) strategy for a grid-connected doubly fed induction generator (DFIG) based wind-turbine system under unbalanced grid voltage condition. The method produces required rotor voltage references based on the sliding mode control (SMC) approach in stationary reference frame, without the requirement of synchronous coordinate...
متن کاملA Novel Stand-Alone Single-Phase Induction Generator Using a Three-Phase Machine and a Single-Phase PWM Inverter
A new type of single-phase stand-alone induction generator using a three-phase induction machine and a single-phase voltage-source PWM inverter is introduced. The generator scheme is capable of producing constant load frequency with a very well regulated output voltage. A small lead acid battery and a single-phase full diode-bridge rectifier are used to feed the inverter. The inverter feeds one...
متن کامل