Driving the paradigm shift in innovative flat-panel detector technology, introducing CMOS on mobile full-size C-arms
ثبت نشده
چکیده
One of these innovations came to life in 2006 with the first introduction of flatpanel detectors (FD) to a mobile C-arm. Ziehm Imaging started the paradigm shift of innovative detector technologies for mobile X-ray imaging from image intensifiers (I. I.) to flat-panel detectors. Other C-arm competitors followed and reconfirmed the trend of implementing amorphous silicon (aSi) flat-panel detectors to their mobile systems.
منابع مشابه
Calibration model of a dual gain flat panel detector for 2D and 3D x-ray imaging.
The continuing research and further development in flat panel detector technology have led to its integration into more and more medical x-ray systems for two-dimensional (2D) and three-dimensional (3D) imaging, such as fixed or mobile C arms. Besides the obvious advantages of flat panel detectors, like the slim design and the resulting optimum accessibility to the patient, their success is pri...
متن کاملA Low Power High Speed Class-B Buffer Amplifier for Flat Panel Display Application
A low power, high speed, but with a large input dynamic range and output swing class-B output buffer circuit which is suitable for the flat-panel display application is proposed. The buffer draws little current during static but has a large driving capability during transients. It has been demonstrated with the TSMC 0.6μm CMOS technology.
متن کاملFront-end electronics for imaging detectors
Front-end electronics for imaging detectors with large numbers of pixels (10–10) is reviewed. The noise limits as a function of detector capacitance and power dissipation are presented for CMOS technology. Active matrix flat panel imagers (AMFPIs) are discussed and their potential noise performance is illustrated. r 2001 Elsevier Science B.V. All
متن کاملIntroducing New Structures for D-Type Latch and Flip-Flop in Quantum-Dot Cellular Automata Technology and its Use in Phase-Frequency Detector, Frequency Divider and Counter Circuits
Quantum-dot cellular automata (QCA) technology is an alternative to overcoming the constraints of CMOS technology. In this paper, a new structure for D-type latch is presented in QCA technology with set and reset terminals. The proposed structure, despite having the set and reset terminals, has only 35 quantum cells, a delay equal to half a cycle of clocks and an occupied area of 39204 nm2. T...
متن کاملActive-Matrix Liquid Crystal Displays - Operation, Electronics and Analog Circuits Design
For more than four decades, Cathode Ray Tube (CRT) Displays have been the dominant display technology providing very attractive performance. Brightness, contrast ratio, high image quality, speed and resolution were the main high standard specifications that CRTs were satisfied. The last two decades, there was a tremendous growth in small portable applications which required the necessary adjust...
متن کامل