Flow Kinematics in Variable-Height Rotating Cylinder Arrays

Experimental data are presented for large arrays of rotating, variable-height cylinders in order to study the dependence of the three-dimensional mean flows on the height heterogeneity of the array. Elements in the examined arrays were spatially arranged in the same staggered paired configuration, and the heights of each element pair varied up to 637.5% from the mean height (kept constant across all arrays), such that the arrays were vertically structured. Four vertical structuring configurations were examined at a nominal Reynolds number (based on freestream velocity and cylinder diameter) of 600 and nominal tip-speed ratios of 0, 2, and 4. It was found that the vertical structuring of the array could significantly alter the mean flow patterns. Most notably, a net vertical flow into the array from above was observed, which was augmented by the arrays’ vertical structuring, showing a 75% increase from the lowest to highest vertical flows (as evaluated at the maximum element height, at a single rotation rate). This vertical flow into the arrays is of particular interest as it represents an additional mechanism by which high streamwise momentum can be transported from above the array down into the array. An evaluation of the streamwise momentum resource within the array indicates up to a 56% increase in the incoming streamwise velocity to the elements (from the lowest to highest ranking arrays, at a single rotation rate). These arrays of rotating cylinders may provide insight into the flow kinematics of arrays of vertical axis wind turbines (VAWTs). In a physical VAWT array, an increase in incoming streamwise flow velocity to a turbine corresponds to a (cubic) increase in the power output of the turbine. Thus, these results suggest a promising approach to increasing the power output of a VAWT array. [DOI: 10.1115/1.4033676]