A Novel Ropes-Driven Wideband Piezoelectric Vibration Energy Harvester
نویسندگان
چکیده
This paper presents a novel piezoelectric vibration energy harvester (PVEH) in which a high-frequency generating beam (HFGB) is driven by an array of low-frequency driving beams (LFDBs) using ropes. Two mechanisms based on frequency upconversion and multimodal harvesting work together to broaden the frequency bandwidth of the proposed vibration energy harvester (VEH). The experimental results show that the output power of generating beam (GB) remains unchanged with the increasing number of driving beams (DBs), compared with the traditional arrays of beams vibration energy harvester (AB-VEH), and the output power and bandwidth behavior can be adjusted by parameters such as acceleration, rope margin, and stiffness of LFDBs, which shows the potential to achieve unlimited wideband vibration energy-harvesting for a variable environment.
منابع مشابه
An Investigation into Resonant Frequency of Triangular V-Shaped Cantilever Piezoelectric Vibration Energy Harvester
Power supply is a bottle-neck problem of wireless micro-sensors, especially where the replacement of batteries is impossible or inconvenient. Now piezoelectric material is being used to harvest vibration energy for self-powered sensors. However, the geometry of a piezoelectric cantilever beam will greatly affect its vibration energy harvesting ability. This paper deduces a remarkably precise an...
متن کاملResonant frequency of bimorph triangular V-shaped piezoelectric cantilever energy harvester
The concept of “energy harvesting” is to design smart systems to capture the ambient energy and to convert it to usable electrical power for supplying small electronics devices and sensors. The goal is to develop autonomous and self-powered devices that do not need any replacement of traditional electrochemical batteries. Now piezoelectric cantilever structures are being used to harvest vibrati...
متن کاملShape Design Optimization of Unimorph Piezoelectric Cantilever Energy Harvester
The most promising method for micro scale energy scavenging is via vibration energy harvesting which converts mechanical energy to electrical energy. Using piezoelectric cantilevers is the most common method for vibration energy harvesting. Changing the shape of the cantilevers can lead to changing the generated output voltage and power. In this work vibration energy harvesting via piezoelectri...
متن کاملA Novel Piezoelectric Energy Harvester Using the Macro Fiber Composite Cantilever with a Bicylinder in Water
A novel piezoelectric energy harvester equipped with two piezoelectric beams and two cylinders was proposed in this work. The energy harvester can convert the kinetic energy of water into electrical energy by means of vortex-induced vibration (VIV) and wake-induced vibration (WIV). The effects of load resistance, water velocity and cylinder diameter on the performance of the harvester were inve...
متن کاملWideband Piezoelectric Energy Harvester Tuned Through its Electronic Interface Circuit
This paper reports a novel technique enabling to tune the resonant frequency of linear inertial piezoelectric energy harvesters through the control strategy of the associated electronic interface circuit. When associated with piezoelectric devices exhibiting high electromechanical coupling, it is expected to enable the variation of the resonant frequency in large proportions.
متن کامل