Feasibility Study of the Plasma Mirror Concept for High Power Lasers
ثبت نشده
چکیده
Public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE (DD-MM-YYYY) 06-10-2006 2. REPORT TYPE Final Report 3. DATES COVERED (From – To) 20 May 2005 20-May-06
منابع مشابه
Analysis of Steady-State Brillouin Nonlinearity in High-Power Fiber Lasers
In the present work, a theoretical analysis of the first-order of stimulatedBrillouin scattering (SBS) in a double-clad (DC) ytterbium (Yb)-doped silica fiber laserin unidirectional pumping mode is presented.An accurate simulation for calculating SBS nonlinearity is performed by considering thecoupled differential rate equations for pump, signal and Stokes powers, as wel...
متن کاملTilted Mirror for Lateral Mode Discrimination and Higher Kink-Free Power in Fiber Pump Lasers - Quantum Electronics, IEEE Journal of
Beam steering arising from interference between the fundamental lateral mode and higher order lateral modes limits the performance of 980-nm power lasers. In this paper, we analyze the feasibility of using a tilted mirror to discriminate against higher order modes. We calculate the reflectivity seen by different modes as a function of the thickness and tilt angle of the coating. Our results sug...
متن کاملHigh Intensity Lasers in Periodontics: A Review
Background and Aim: Lasers can serve as a new powerful tool in dentistry. High intensity laser therapy is becoming the treatment of choice compared with conventional periodontal therapy due to accurate incision and soft and hard tissue ablation, hemostasis, reduction of postoperative pain and infection, optimal debridement, and enhanced healing. Although high intensity laser therapy assumes to ...
متن کاملImproving the Thermal Characteristics of Semiconductor Lasers Using a New Asymmetric Waveguide Structure
Self-heating leads to a temperature rise of the laser diode and limits the output power and efficiency due to increased loss and decreased differential gain. To control device self-heating, it is required to design the laser structure with a low optical loss, while the heat flux must spread out of the device efficiently. In this study, a new asymmetric waveguide design is proposed and th...
متن کاملDesign and implementation of high voltage square wave power source with variable DC-offset and study its effect on atmospheric-pressure plasma
Nowadays high-voltage power sources is used in different areas such as generation of atmospheric-pressure plasma. Different voltage waveforms affect the plasma generation and its quality. In this paper a new high voltage square wave with DC-offset power source is presented to study the different parameters on plasma generation and propagation. The proposed converter which is based on power semi...
متن کامل