Fatigue Life Assessment Method for Prestressed Concrete Sleepers
نویسندگان
چکیده
Railway Engineering Institute, China Academy of Railway Sciences, Beijing, China, Birmingham Centre for Railway Research and Education, School of Civil Engineering, The University of Birmingham, Edgbaston, United Kingdom, Department of Civil Engineering, Riga Technical University, Riga, Latvia, Department of Civil Engineering, School of Engineering, The University of Birmingham, Birmingham, United Kingdom
منابع مشابه
Investigation on simulation of train loading on prestressed concrete sleepers
Railway concrete sleepers have been developed and utilized in railway industry for over 50 years. Cyclic loading because of vibration on sleepers due to the train loading and the velocity of train itself and also a small percentage of bad wheels, can eventually lead to a crack network and failure of component. The objective of this study is to investigate the load carrying capacity of the selec...
متن کاملFatigue Assessment Model of Corroded RC Beams Strengthened with Prestressed CFRP Sheets
This paper presents a fatigue assessment model that was developed for corroded reinforced concrete (RC) beams strengthened using prestressed carbon fiber-reinforced polymer (CFRP) sheets. The proposed model considers the fatigue properties of the constituent materials as well as the section equilibrium. The model provides a rational approach that can be used to explicitly assess the failure mod...
متن کاملAnalysis of the Influence of Cracked Sleepers under Static Loading on Ballasted Railway Tracks
The principal causes of cracking in prestressed concrete sleepers are the dynamic loads induced by track irregularities and imperfections in the wheel-rail contact and the in-phase and out-of-phase track resonances. The most affected points are the mid-span and rail-seat sections of the sleepers. Central and rail-seat crack detection require visual inspections, as legislation establishes, and i...
متن کاملTOPOLOGY OPTIMIZATION OF PRETENSIONED CONCRETE BEAMS CONSIDERING MATERIAL NONLINEARITY
In this paper, the bi-directional evolutionary structural optimization (BESO) method is used to find optimal layouts of 3D prestressed concrete beams. Considering the element sensitivity number as the design variable, the mathematical formulation of topology optimization is developed based on the ABAQUS finite element software package. The surface-to-surface contact with a small sliding between...
متن کامل