Torque Ripple Reduction of an Interior PM Synchronous Motor by Compensating Harmonic Currents based on Flux Linkage Harmonics
نویسندگان
چکیده
The back emf harmonics of a permanent magnet (PM) synchronous motor is a major source of torque ripple. For torque control applications including column fitted MDPS (motor driven power steering) systems, it is essential to reduce the mechanical vibrations due to torque ripples at low speeds. In this paper, a torque ripple reduction algorithm for interior PM synchronous motors is proposed. The harmonic currents that cancel the 6 order torque harmonic are added to the nominal dq currents for MTPA (maximum torque per ampere) operation. The compensated harmonic currents are derived from flux linkage harmonics based on a FFT analysis of the back emf harmonics. Simulation and experimental results verify that the 6 order torque harmonic and THD of the torque ripple are reduced by compensating the dq harmonic currents.
منابع مشابه
A new optimization of segmented Interior permanent magnet synchronous motor based on increasing flux weakening range and output torque
In this paper a new optimization function for increasing the flux weakening range and output torque value of segmented interior permanent magnet synchronous motor (SIPMSM) is presented. In proposed objective function normalized characteristic current and saliency ratio are considered as two optimization variables during optimization process. The focus of this paper is rotor structure design suc...
متن کاملOptimal Design of Axial Flux Permanent Magnet Synchronous Motor for Electric Vehicle Applications Using GAand FEM
Axial Flux Permanent Magnet (AFPM) machines are attractive candidates for Electric Vehicles (EVs) applications due to their axial compact structure, high efficiency, high power and torque density. This paper presents general design characteristics of AFPM machines. Moreover, torque density of the machine which is selected as main objective function, is enhanced by using Genetic Algorithm (GA) a...
متن کاملNovel Unified Control Method of Induction and Permanent Magnet Synchronous Motors
Many control schemes have been proposed for induction motor and permanent magnet synchronous motor control, which are almost highly complex and non-linear. Also, a simple and efficient method for unified control of the electric moto are rarely investigated. In this paper, a novel control method based on rotor flux orientation is proposed. The novelties of proposed method are elimination of q-ax...
متن کاملInjected Rotor Shape for Five - Phase Surface - Mounted Permanent Magnet
I . Introduction Multi-phase machines offer several key features, such as high reliability, high torque density, and high efficiency . Therefore, they are obtained wide applications from automotive to aerospace [1][2] . One of them is the five-phase PM machine, where the torque density can be improved by injecting third harmonic current . However, in order to maintain high torque density and re...
متن کاملUe Prediction Using the Flux-mmf in Ac, Dc, and Reluctance Motors
This paper uses the flux-MMF diagram to compare and contrast the torque production mechanism in seven common types of electric motor. The flux-mmf diagram is a generaked version of the flux-linkage versus current (+i) diagram €or switched-reluctance motors. It is illustrated €or switchedreluctance, synchronous-reluctance, induction, brushless ac, brushless dc, interior PM and dc commutator moto...
متن کامل