Design of a Single Phase High Voltage Dc Power Supply at 15 Kv Output Using Voltage Doubler Circuit
نویسندگان
چکیده
This paper describes the design and implementations of a single phase high voltage DC power supply at 15 kV output. This explain the detail description of the simulation, design, development and implementation of the hardware work to build a high voltage DC power supply in the laboratory and its simulation works done by using PSpice software. The designed DC power supply it can be used in industrial applications. Simulation and experimental results are presented in terms of performance and implementation.
منابع مشابه
Design and Simulation of a New DC Power Supply Based on Dual Bridge Matrix Converter
A conventional high power DC power supply systems consist of a three-phase diode rectifier followed by a high frequency converter to supply loads at regulated DC voltage. These rectifiers draw significant harmonic currents from the utility, resulting in poor input power factor. In this paper, a DC power supply based on dual-bridge matrix converter (DBMC) with reduced number of switches is p...
متن کاملSimulation, Design and Construction of High Voltage DC Power Supply at 15 kV Output Using Voltage Multiplier Circuits
This study describes the details of high voltage DC power supply whose output voltage is 15 kV. In this study, we review the major aspects of the design of voltage multiplier circuits and constructed a prototype power supply based on simulation, design and implementation of the hardware works in the laboratory. Its simulation works done by using EMTDC PSCAD and PSPICE software. Experimental res...
متن کاملDevelopment of Piezoelectric Micro-energy Harvesting System Using Voltage Doubler
Nowadays renewable micro-energy harvesting system is becoming attractive, because this energy is free which leads to reduce energy cost. Piezoelectric is one of the common energy harvesting systems. Generally, the output of a piezoelectric transducer is a small AC voltage and its power is also small. As a result, the convertion of this low AC voltage into DC voltage by using rectifier diode is ...
متن کاملA Development of Class E Converter Circuit for Loosely Coupled Inductive Power Transfer System
This paper presents an Inductive Power Transfer (IPT) system design using a Class E converter circuit. The Class E converter is used to drive a nonlinear load and theoretically it offers 100% efficiency. To be specifically, the performance of IPT system at 1MHz operating frequency and 9V DC supply voltage is analyzed. Voltage doubler rectifier and Darlington circuit are proposed in this paper t...
متن کاملA Novel Bi-Directional Isolated Power Flow Dc–Dc Converter for Hybrid System
In Electrical power systems in future uninterruptible power supplies or electrical vehicles may employ hybrid energy sources, such as fuel cells and super capacitors. It will be necessary to efficiently draw the energy from these two sources as well as recharge the energy storage elements by the dc bus. In this paper, a bidirectional isolated dc–dc converter controlled by phase-shift angle and ...
متن کامل