Screening of self-assembled monolayer for aflatoxin B1 detection using immune-capacitive sensor
نویسندگان
چکیده
A capacitive biosensor was used for detection of aflatoxin B1. Two different methods for cleaning gold electrodes were evaluated using cyclic voltammetry in the presence of ferricyanide as redox couple. The methods involve use of a sequence of cleaning steps avoiding the use of Piranha solution and plasma cleaner. Anti-aflatoxin B1 was immobilized on self-assembled monolayers (SAM). The immune-capacitive biosensor is able to detect aflatoxin B1 concentrations in a linear range of 3.2 × 10-12 M to 3.2 × 10-9 M when thiourea was used to form the SAM; 3.2 × 10-9 M to 3.2 × 10-7 M when thioctic acid was used. When the gold surface was isolated with tyramine-electropolymerization linear ranges of 3.2 × 10-13 M to 3.2 × 10-7 M and 3.2 × 10-9 M to 3.2 × 10-7 M where obtained, respectively. The results obtained show the difference in linear range, limit of detection, and limit of quantification when different self-assembled monolayers are used for aflatoxin B1 detection.
منابع مشابه
Aminothiophenol Furfural Self-assembled Gold Electrode Sensor for Determination of Dopamine in Pharmaceutical Formulations
A new Schiff base 2-aminothiophenol furfural self assembled monolayer (SAM) has been fabricated on a bare gold electrode as a novel sensor for determination of dopamine. Electrochemical impedance spectroscopywas utilized to investigate the properties of the Au 2-aminothiophenol furfural self assembled monolayermodified electrode (Au ATF SAM-ME) using the [Fe(CN)6]3-/4- redox couple. The electro...
متن کاملA Low-Cost Label-Free AFB1 Impedimetric Immunosensor Based on Functionalized CD-Trodes
This work describes the investigation of a label-free immunosensor for the detection of aflatoxin B1 (AFB1). CD-trodes (electrodes obtained from recordable compact disks) were used as low-cost and disposable transducers after modification with a self-assembled monolayer (SAM) of lipoic acid. The anti-aflatoxin B1 antibody was immobilized via EDC/NHS activation, followed by blocking with bovine ...
متن کاملBioimprinting as a tool for the detection of aflatoxin B1 using a capacitive biosensor
A strategy for the detection of aflatoxin B1 using a capacitive biosensor has been studied. The use of proteins for the generation of sites with high specificity against aflatoxin B1 are produced via bioimprinting. This technique has become a tool for the detection of aflatoxin B1 using a capacitive biosensor. The results demonstrate the ability to generate specific interactions with aflatoxin ...
متن کاملLabel Free QCM Immunobiosensor for AFB1 Detection Using Monoclonal IgA Antibody as Recognition Element
This study introduces the use of an IgA isotype aflatoxin (AF) specific monoclonal antibody for the development of a highly sensitive Quartz Crystal Microbalance (QCM) immunobiosensor for the detection of AF in inhibitory immunoassay format. The higher molecular weight of IgA antibodies proved an advantage over commonly used IgG antibodies in label free immunobiosensor measurements. IgA and IgG...
متن کاملDevelopment of antibody-based microarray assay for quantitative detection of aflatoxin B1
BACKGROUND: Aflatoxin B1 (AFB1) is a toxic metaboliteproduced by Aspergillus species that contaminates a wide range ofagricultural products. OBJECTIVES: This study was designed todevelop a rapid and highly sensitive immunoassay method inmicroarray format for quantitative detection of AFB1 to evaluatethe potential of microarray platform for high-throughput screening,which can be beneficial in fo...
متن کامل