Prediction of mode-I overload-induced fatigue crack growth rates using neuro-fuzzy approach
نویسندگان
چکیده
This is the pre-peer reviewed version of the article: Mohanty J R, Verma B B, Ray P K, Parhi D R K, Prediction of mode-I overload-induced fatigue crack growth rates using neuro-fuzzy approach, Expert Systems with Applications, 37(2010), 3075-3087, which has been published in the final form at http://www.sciencedirect.com/science/journal/09574174 Prediction of mode-I overload-induced fatigue crack growth rates using neuro-fuzzy approach
منابع مشابه
Prediction of post overload fatigue crack growth life of HSLA steel under mixed-mode (I and II) spike overload by using genetic programming
In the present investigation, fatigue crack growth tests under mixed-mode (I and II) overload have been conducted on HSLA steel and subsequently genetic programming has been applied to predict post overload fatigue life. It is observed that the proposed model predicts fatigue life of HSLA steel with reasonable accuracy.
متن کاملModelling combined HCF-LCF fatigue crack growth under the influence of LCF overload
Fatigue crack growth (FCG) rates have previously been reported in forged Ti6Al-4V aero-engine disk material under the conjoint action of LCF and HCF cycles at room temperature. It is found that systematic increases in LCF overload, applied prior to the commencement of the HCF cycles, reduce the contribution of the HCF cycles to crack growth rates. The application of overload also enhances the s...
متن کاملNUMERICAL INVESTIGATION OF CRACK ORIENTATION IN THE FRETTING FATIGUE OF A FLAT ROUNDED CONTACT
The growth of slant cracks by fretting fatigue of a half plane in contact with a flat rounded pad was studied. The mode I and mode II stress intensity factors for cracks of various lengths and directions were calculated using the semi-analytical method of the distribution of dislocations, and their cumulative effect on the crack growth was investigated using the strain energy density criterion....
متن کاملEffect of Boundary Condition on Pre-Existing Crack Under Fatigue Loading
In this paper, the present investigation has been conducted keeping in mind some of the problems concerning the crack propagation direction and growth under constant loading in an inclined crack geometry. The present studies mainly focused on the development and modifications in the crack growth criterion to account the biaxial, shear loading and number of stress terms. Existing criteria for th...
متن کاملFracture mechanics-based life prediction of a riveted lap joint
In this paper, three-dimensional modeling of the fatigue crack growth profiles was performed in a simple riveted lap joint. Simulation results showed that mode I was dominated on the one side of the plates and the crack straightly grew on this side, while the other side of the plates was in a mixed-mode condition and the crack propagation path was not straight on this side. Afterward, the fract...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Expert Syst. Appl.
دوره 37 شماره
صفحات -
تاریخ انتشار 2010