Influence of impact speed on water droplet erosion of TiAl compared with Ti6Al4V
نویسندگان
چکیده
Water Droplet Erosion (WDE) as a material degradation phenomenon has been a concern in power generation industries for decades. Steam turbine blades and the compressor blades of gas turbines that use water injection usually suffer from WDE. The present work focuses on studying erosion resistance of TiAl as a potential alloy for turbine blades compared to Ti6Al4V, a frequently used blade alloy. Their erosion behaviour is investigated at different droplet impact speeds to determine the relation between erosion performance and impact speed. It is found that the relationship is governed by a power law equation, ER ~ V(n), where the speed exponent is 7-9 for Ti6Al4V and 11-13 for TiAl. There is a contrast between the observed speed exponent in this work and the ones reported in the literature for Ti6Al4V. It is attributed to the different erosion setups and impingement conditions such as different droplet sizes. To verify this, the erosion experiments were performed at two different droplet sizes, 464 and 603 μm. TiAl showed superior erosion resistance in all erosion conditions; however, its erosion performance exhibits higher sensitivity to the impact speed compared to Ti6Al4V. It means that aggressive erosion conditions decrease the WDE resistance superiority of TiAl.
منابع مشابه
The measurement of droplet size distribution of water-oil emulsion through NMR method
The effects of water/oil volume ratio, type and concentration of demulsifier, water salinity and mixing speed on the average water droplets size in water-oil emulsion are evaluated at different times through NMR measurements.The type and concentration of demulsifier have the greatest effects on the average droplet size with 38% and 31.5%, respectively. The water/oil volume ratio, water salinity...
متن کاملWater droplet impact on elastic superhydrophobic surfaces
Water droplet impact on surfaces is a ubiquitous phenomenon in nature and industry, where the time of contact between droplet and surface influences the transfer of mass, momentum and energy. To manipulate and reduce the contact time of impacting droplets, previous publications report tailoring of surface microstructures that influence the droplet - surface interface. Here we show that surface ...
متن کاملAnalysis of relations between water erosion features and effective parameters on their intensity and spatial patterns (Case study: Baleghli chay watershed, Ardebil, Iran)
Soil erosion results from an interaction of several parameters, which vary in space and time. Awareness ofenvironmental changes and their impact on the intensity and spatial pattern of water erosion can effectively help inrecognition of erosional reactions versus the affecting factors. The aim of this paper is to describe the development ofa methodology based on present knowledge and available ...
متن کاملInfluence of Salinity, Surfactants and Power of Ultrasonic Homogenizer on Droplet Size Distribution of Crude Oil/Water Emulsions
متن کامل
Numerical simulation of laser beam welding of Ti6Al4V sheet
This paper was aimed to report the 3D finite element analysis simulation of laser welding process of Ti6Al4V 1.7 mm sheets in butt joint in order to predict the temperature distribution, hardness, and weld geometry. The butt-joint welds were made using CO2 laser with the maximum power of 2.2 kW in the continuous wave mode. A part of the experimental work was carried out to verify the weld geome...
متن کامل