Simulation of Manufacturing Variations in a Z-axis CMOS-MEMS Gyroscope
نویسندگان
چکیده
This paper uses MEMS circuit-level simulation to correlate gyro performance measures such as zero rate output (ZRO), linear acceleration sensitivity (Sa) and cross-axis sensitivity (Sca) to geometrical asymmetries. Elastic and electrostatic asymmetries in the gyroscope may arise due to device-level manufacturing variations in beam width, comb gap and metal mask misalignment in the CMOS-MEMS process. Analytical equations for the non-idealities are derived and compared with the simulation results. The analyses and simulations are used to develop pointers for robust design as well as manufacturing tolerances for limiting nonidealities.
منابع مشابه
An Elastically Gimbaled Z-Axis CMOS-MEMS Gyroscope
This paper presents a vertical (Z-axis) CMOS-MEMS gyroscope with a measured noise floor of 0.03°/sec/ and 1% linearity in the range of -360° /sec to 360°/sec. The gyroscope is fully compatible with conventional CMOS processes, which enable the integration of most of the conditioning circuits. It is fabricated in a three-metal-layer 0.5μm CMOS process followed by a two-step dry etch release. An ...
متن کاملDesign and Analysis of a MEMS Comb Vibratory Gyroscope
MEMS (Micro-electro-mechanical Systems) refer to devices or systems integrated with electrical and mechanical components in the scale of microns. Due to its small size, low cost, low power consumption and high efficiency, MEMS technology has been widely used in many fields. In this paper, a novel comb-driven, differential capacitance sensing MEMS vibratory gyroscope based on glass-silicon-glass...
متن کاملA Novel Control System Design for Vibrational MEMS Gyroscopes
There are two major control problems associated with vibrational MEMS gyroscopes: to control two vibrating axes (or modes) of the gyroscope, and to estimate a time-varying rotation rate. This paper demonstrates how a novel active disturbance rejection control addresses these problems in the presence of the mismatch of natural frequencies between two axes, mechanical-thermal noises, Quadrature e...
متن کاملANFIS Approach for Tracking Control of MEMS Triaxial Gyroscope
In this paper, an Adaptive Neuro Fuzzy Inference System (ANFIS) based control is proposed for the tracking of a Micro-Electro Mechanical Systems (MEMS) gyroscope sensor. The ANFIS is used to train parameters of the controller for tracking a desired trajectory. Numerical simulations for a MEMS gyroscope are looked into to check the effectiveness of the ANFIS control scheme. It proves that the sy...
متن کاملA MEMS - CMOS Tri - Axial Rate Gyroscope Controlled Using a Time - Multiplexed Sensor
This paper presents a novel tri-axial rate gyroscope design. It reviews the physics of the gyroscope and specifies the application domain for the gyro. The design is then presented. It features a unique method of operation; CMOS metal layers are used for sensing and activation for all three axes. This method was previously thought of for sensing z-axis vibrations but not activation of z-axis vi...
متن کامل