Rheological behavior of precursor PPV monolayers.

نویسندگان

  • J W Luinge
  • G W Nijboer
  • J G Hagting
  • E J Vorenkamp
  • G G Fuller
  • A J Schouten
چکیده

The rheological behavior of different precursor poly(p-phenylene vinylene) (prec-PPV) monolayers at the air-water interface was investigated using an interfacial stress rheometer (ISR). This device nicely reveals a transition of the precursor poly(2,5-dimethoxy-1,4 phenylene vinylene) (prec-DMePPV) monolayer from Newtonian to elastic behavior with increasing surface pressure. The transition is accompanied by an increase in the modulus. This behavior coincides with the coagulation of different 2D condensed domains as revealed by Brewster angle microscopy (BAM). However, partly converted prec-DMePPV monolayers show elastic behavior even at low surface pressures, although a sudden increase of the moduli does occur. This phenomenon is attributed to enhanced hydrophobic interactions between the conjugated moieties in the partly converted polymers. The latter also explains the stretching behavior of the partly converted prec-DMePPV upon transfer in Langmuir-Blodgett-type vertical dipping. The increase of the moduli which is observed is much more gradual in the precursor poly(2,5-dibutoxy-1,4-phenylene vinylene), prec-DBuPPV, a monolayer which is in agreement with the expected expanded state of the latter monolayer.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The influence of headgroup structure and fatty acyl chain saturation of phospholipids on monolayer behavior: a comparative rheological study.

This paper compares six phospholipidic monolayers at the water/chloroform interface by performing dilational rheological measurements with a drop tensiometer apparatus. The chosen lipids differ both in their headgroup structure and fatty acyl chain saturation or symmetry. The study concentrated on monolayers formed with DPPC, DPPE, DOPC, DOPE, POPC and POPE. Using a generalized Maxwell rheologi...

متن کامل

Viscosity and Rheological Behavior of Ethylene Glycol-Maghemite Nanofluids

This work is devoted on the rheological behavior of ethylene glycol based nanofluids containing maghemtite nanoparticles. The size of these maghemite nanoparticles was measured using XRD and found to be about <50 nm. Major factors that influence on viscosity and rheological behavior, such as, temperature and particle mass concentration, were investigated over 25–80°C and 0.2 and 2% respectivel...

متن کامل

The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks

Rheological characteristics of powder injection molding PIM feedstocks play an important role in final properties of manufactured MMCs. In this study, six formulations composed of magnesium and SiC powder (99:1 wt.%) and a specific binder  were prepared to investigate the influence of binder composition, powder to binder ratio, time and temperature on rheological properties of the feedstock. Th...

متن کامل

The Rheological Behavior of Wheat Starch Particulates Filled Uncured Styrene-Butadiene Rubber

This study treats one important aspect of starch-filled rubber compounds which is their rheological behavior. Starch-based SBR1712 masterbatches resulting from various formulations were prepared using a mini two roll mill and an internal mixer (Plastograph Brabender).The content in starch was varied from 0 to 50 phr. The effect of starch content on the rheological behavior was ev...

متن کامل

Optimizing Rheological Behavior of Steel Feedstocks in Advanced Process of Alloying Powder Injection Molding

The rheological behavior of feedstocks used in powder injection molding technology influences strongly on the final properties of the products. Powder loading is one of the important factors that have a great distribution on rheological behaviors. By using the gas atomized spherical 316L stainless steel powder and the binder of 55% paraffin wax+ 40% polyethylen+ 5% stearic acid, four kinds of f...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Langmuir : the ACS journal of surfaces and colloids

دوره 20 26  شماره 

صفحات  -

تاریخ انتشار 2004