An efficient methodology for measurement of the average electrical properties of single one-dimensional NiO nanorods
نویسندگان
چکیده
We utilized a metal tantalum (Ta) ball-probe to measure the electrical properties of vertical-aligned one-dimensional (1D) nickel-oxide (NiO) nanorods. The 1D NiO nanorods (on average, ~105 nm wide and ~700 nm long) are synthesized using the hot-filament metal-oxide vapor deposition (HFMOVD) technique, and they are cubic phased and have a wide bandgap of 3.68 eV. When the 1D NiO nanorods are arranged in a large-area array in ohmic-contact with the Ta ball-probe, they acted as many parallel resistors. By means of a rigorous calculation, we can easily acquire the average resistance RNR and resistivity ρNR of a single NiO nanorod, which were approximately 3.1 × 10(13) Ω and 4.9 × 10(7) Ω.cm, respectively.
منابع مشابه
Preparation and characterization of Graphene/Nickel Oxide nanorods composite
Graphene-based nanocomposites are newly emerged materials with a wide range of applications such as in supercapacitors electrode. The high conductivity and ability for passing electric current, makes Graphene an appropriate new item to be used in cells. Electroactive transition metal oxides, owing fast reversible redox pairs, are used to store electrical charge. Furthermore, the Graphene/NiO na...
متن کاملPreparation and characterization of Graphene/Nickel Oxide nanorods composite
Graphene-based nanocomposites are newly emerged materials with a wide range of applications such as in supercapacitors electrode. The high conductivity and ability for passing electric current, makes Graphene an appropriate new item to be used in cells. Electroactive transition metal oxides, owing fast reversible redox pairs, are used to store electrical charge. Furthermore, the Graphene/NiO na...
متن کاملInfluence of Cr dopant on the microstructure and optical properties of ZnO nanorods
One-dimensional (1D) undoped and Cr doped ZnO nanorods with average length of 1 µm and diameter of 80 nm were synthesized using hydrothermal method where a fast growth of ZnO nanorods on the seed layer was observed. Afterwards, the effects of Cr dopant on structural, surface morphology and optical properties of nanorods were studied using X-ray diffraction (XRD), scanning electron microscopy (S...
متن کاملEffect of Titania Colloid Solution Concentration on Hydrophobicity of Well-Aligned TiO2 Nanorods Synthesized via Hydrothermal Method
Among one dimensional nanomaterials, TiO2 nanorods have found important applications in various industries due to optical, photocatalyst and self-cleaning properties. In this research, at first TiO2 nanorods were synthesized on a glass substrate by hydrothermal method. Then a thin film of TiO2 particles was dip coated (as seed layer) on the substrate. After that, hydrothermal synthesis of TiO2 ...
متن کاملSynthesis of Polythiophene/Manganese Dioxide Nanocomposites by In-situ Core-shell Polymerization Method and Study of their Physical Properties
The present research work describes an efficient method for facile synthesis of α-MnO2 nanorods by hydrothermal method and preparation of a series of polythiophene/manganese dioxide (PTh/MnO2) nanocomposites with various α-MnO2 ratios. These nanocomposites were fabricated by in-situ oxidative polymerization method using FeCl3 as oxidant, and characterized by Fourier transformed infrared (FT-IR)...
متن کامل