The effectiveness of a multi-spark electric discharge system in the destruction of microorganisms in domestic and industrial wastewaters.

نویسندگان

  • A M Anpilov
  • E M Barkhudarov
  • N Christofi
  • V A Kop'ev
  • I A Kossyi
  • M I Taktakishvili
  • Yu V Zadiraka
چکیده

The aim of this work was to investigate the effectiveness of a high voltage multi-spark electric discharge, with pulse energy of 1 Joule, in killing microorganisms in wastewater. Wastewater from primary treated effluent arising from domestic and industrial sources was abstracted for continuous pulsed discharge disinfection. The wastewater contained a large mixed population of microorganisms (approximately 10(7) CFU ml(-1) [10(9) CFU 100 ml(-1)] total aerobic heterotrophic bacteria) including vegetative cells and spores. The electrical conductivity of the wastewater ranged from 900-1400 microS cm(-1) and it was shown that a specific energy of 1.25-1.5 J cm(-3) was required to achieve 1 log reduction in bacterial (faecal coliforms/total aerobic heterotrophs) content. This is higher than that previously shown to reduce the population of E. coli in tap water of low conductivity, demonstrating the role of total wastewater constituents, including dissolved and particulate substances, water colour and the presence of microbial spores, in effective disinfection. The system can be engineered to eradicate microbial populations to levels governed by legislation by increasing treatment time or energy input.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Synthesis of Zinc/Zinc Oxide Nanoparticles by Electric Discharge Method in Distilled-Water and Argon-Gas Environments

Zinc/zinc oxide nanoparticles are used in an increasing number of medical and industrial applications due to their attractive physical, chemical and antibacterial properties. Therefore, achieving a simple and beneficial way to produce them is an important aspect. In this study, zinc/zinc oxide nanopowders were synthesized by fast electric discharges between two electrodes of (a) a spark device ...

متن کامل

Multiple performance characteristics optimization for Al 7075 on electric discharge drilling by Taguchi grey relational theory

Electric discharge drill machine (EDDM) is a spark erosion process to produce micro-holes in conductive materials. This process is widely used in aerospace, medical, dental and automobile industries. As for the performance evaluation of the electric discharge drilling machine, it is very necessary to study the process parameters of machine tool. In this research paper, a brass rod 2 mm diameter...

متن کامل

Modeling and Optimization of Industrial Multi-Stage Compressed Air System Using Actual Variable Effectiveness in Hot Regions

In this article, modeling and optimization of power consumption of two–stage compressed air system has been investigated. To do so, the two – stage compressed air cycle with intercooler of FAJR Petroleum Company was considered. This cycle includes two centrifugal compressors, a shell, and a tube intercooler. For modeling of power consumption, actual compressors isentropic efficiencies and inter...

متن کامل

Modeling and Optimization of Industrial Multi-Stage Compressed Air System Using Actual Variable Effectiveness in Hot Regions

In this article, modeling and optimization of power consumption of two–stage compressed air system has been investigated. To do so, the two – stage compressed air cycle with intercooler of FAJR Petroleum Company was considered. This cycle includes two centrifugal compressors, a shell, and a tube intercooler. For modeling of power consumption, actual compressors isentropic efficiencies and inter...

متن کامل

Experimental Investigation of Surface Roughness and Kerf Width During Machining of Blanking Die Material on Wire Electric Discharge Machine

Wire electric discharge machine (WEDM) is spark erosion in unconventional machining technique to cut hard and the conductive material with a wire as an electrode. The blanking die material SKD 11 is a high carbon and high chromium tool steel with high hardness and high wearing resistance property. This tool steel has broad application in press tools and dies making industries. In this research ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of water and health

دوره 2 4  شماره 

صفحات  -

تاریخ انتشار 2004