Modelling of failure mode transition in ballistic penetration with a continuum model describing microcracking and 7ow of pulverized media

A new continuum model to describe damage, fragmentation and large deformation of pulverized brittle materials is presented. The multiple-plane-microcracking (MPM) model, developed by Espinosa, has been modiAed to track microcracking on 13 orientations under high pressure, high strain rate and high deformation. This model provides the elastic and inelastic response of the material before massive crack coalescence. When pulverization occurs, the constitutive response is modelled by means of a viscoplastic model for granular material, which is a generalization to three dimensions of the double-sliding theory augmented by a consolidation mechanism. The initialization of the granular model is governed by a yield surface at the onset of massive crack coalescence. This is accomplished by examining a representative volume element, modelled using the MPM model, in compression-shear. The main advantage of this approach is to keep a continuum model at all stages of the deformation process and thus avoid the diDculties of crack representation in a discrete Anite element code. This model has been implemented in LS-DYNA and used to examine interface defeat of long rod penetrators by a conAned ceramic plate. The numerical simulations are compared to experiments in order to identify failure modes. The model parameters were obtained independently by simulating plate and rod impact experiments. The proposed model captures most of the physical observations as well as failure mode transition, from interface defeat to full penetration, with increasing impact velocity. Copyright ? 2002 John Wiley & Sons, Ltd.