Design of a Compact Ultra-Wide Band Bow-Tie Slot Antenna System for the Evaluation of Structural Changes in Civil Engineering Works
نویسنده
چکیده
Abstract—A compact UWB bowtie-slot antenna (36× 23 cm2) fed by a CPW transition is proposed for an improved ground-coupling radar. The antenna has an operating frequency band in the range [0.46; 4] GHz. Full-wave modeling using the FDTD approach has allowed to study in details the antenna radiation characteristics in air and in the presence of a soil. Afterwards, a radar system made of a pair of independent shielded bowtie antennas has been considered to probe the sub-surface very close to the air-soil interface. The polarization diversity in the E and H-planes is an important aspect which has been studied in order to further detect the orientation of damages (cracks, delaminations . . . ) in civil engineering structures. Measurements in a dry and wet sand in different system configurations have allowed to first characterize the GPR system and to draw comparisons with numerical results. The ability of the radar to detect small buried objects has been investigated.
منابع مشابه
UWB Planar Conical Horn-Shaped Self-Complementary Bow-Tie Antenna
An ultra-wideband (UWB) self-complementary planar bow-tie antenna (SCPBTA) is proposed. The antenna consists of a printed conical horn-shaped (CHS) radiator and a counterpart CHS slot etched on a rectangular ground plane. The printed CHS radiator is connected directly to the 50Ω microstrip line by bending the end portion of the feed line. As a result, the antenna has a simple structure which do...
متن کاملMulti Attribute Analysis of a Novel Compact UWB Antenna with Via-fed Elements for Dual Band Notch Function (RESEARCH NOTE)
A compact microstrip-fed antenna with dual notched bands is proposed. First, a simple basic configuration is presented for Ultra Wide Band (UWB) applications and then the dual band notched structure is extended from the UWB one. The basic structure of the UWB antenna consists of a simple square radiating patch and a ground plane with a wide square slot on back of the substrate. A semi-circle sh...
متن کاملDesign and Implementation of a Compact Super-Wideband Printed Antipodal Antenna Using Fractal Elements
A compact printed fractal antipodal bow-tie antenna is designed and implemented to simultaneously cover the operations in the C, X, and Ku-bands. It is demonstrated that by addition of small fractal elements at the sides of hexagonal arms of the bow-tie, a wide operating frequency range of 3.3 to 19.1 GHz can be covered while antenna size is only 30×34×1.2 mm3. In order to match the antenna to ...
متن کاملModified U-Slot Stacked Micro-Strip Patch Antenna for Ultra-Wideband Applications in S Band, C Band and X Band
The U-slot micro-strip patch antennas were originally developed for bandwidth broadening applications. This study presents a transmission line feed to modify the U-slot stacked rectangular micro-strip patch antenna for Ultra-Wide Band (UWB) communications. The modified antenna has a U-cut loaded with parallel slits and corner slots and is printed on a dielectric substrate of FR4 with relative p...
متن کاملDesign and Miniaturization of a Novel Fractal Microstrip Antenna for UWB Applications
A novel printed octagonal fractal microstrip antenna with semi-elliptical ground plane is presented for ultra wide band applications. The proposed antenna has a compact size of 20×20×1 mm³. The measured result of the antenna exhibits the ultra wide band characteristics from 2/9 to 14/2 GHz. In this paper, reducing antenna’s size by 35%, the same results were achieved, while small dimension frac...
متن کامل