Simulation, Design and Construction of High Voltage DC Power Supply at 15 kV Output Using Voltage Multiplier Circuits
نویسندگان
چکیده
This study describes the details of high voltage DC power supply whose output voltage is 15 kV. In this study, we review the major aspects of the design of voltage multiplier circuits and constructed a prototype power supply based on simulation, design and implementation of the hardware works in the laboratory. Its simulation works done by using EMTDC PSCAD and PSPICE software. Experimental results are presented to verify the simulation results.
منابع مشابه
Design and Simulation of a New DC Power Supply Based on Dual Bridge Matrix Converter
A conventional high power DC power supply systems consist of a three-phase diode rectifier followed by a high frequency converter to supply loads at regulated DC voltage. These rectifiers draw significant harmonic currents from the utility, resulting in poor input power factor. In this paper, a DC power supply based on dual-bridge matrix converter (DBMC) with reduced number of switches is p...
متن کاملDesign of a Single Phase High Voltage Dc Power Supply at 15 Kv Output Using Voltage Doubler Circuit
This paper describes the design and implementations of a single phase high voltage DC power supply at 15 kV output. This explain the detail description of the simulation, design, development and implementation of the hardware work to build a high voltage DC power supply in the laboratory and its simulation works done by using PSpice software. The designed DC power supply it can be used in indus...
متن کاملPower Supply and Current Modulation Circuits for Semiconductor Lasers
Design and construction of a stable current supply with protection circuits are described. The reported circuit provides a high-stable and high-level current variable from 0.5-1.2 A with the protect ion circuits to prevent over load current, voltage and off-range temperature operation. A detailed analysis of the circuit parameters is given and the time behaviors of the load voltage/current and ...
متن کاملHigh Voltage Power Supply for Electro-optics Applications
This paper describes the development of high voltage power supply for electro-optics applications. The power supply consists of MOSFET driver, voltage multiplier circuit and voltage controller. A single timer 555 generates 1.3 kHz square pulse to drive the power MOSFET that connected to a standard step up transformer. By using voltage multiplier technique, the output from secondary transformer ...
متن کاملA Low-Voltage, Low-Power, Two-Stage Amplifier for Switched-Capacitor Applications in 90 nm CMOS Process
Abstract- A novel low-voltage two-stage operational amplifier employing resistive biasing is presented. This amplifier implements neutralization and correction common mode stability in second stage while employs capacitive dc level shifter and coupling between two stages. The structure reduces the power consumption and increases output voltage swing. The compensation is performed by simple mill...
متن کامل