A High Linearity VHF Programmable Gain LNA
نویسندگان
چکیده
A VHF (30MHz-300MHz) band digitally programmable low noise amplifier (LNA) has been implemented with a 0.25um standard CMOS process for VHF CMMB mobile TV tuners. Utilizing a T-match input network, input matching of more than a decade bandwidth is achieved across all gain settings. Adopting the multiple gated technique, gain flatness enhancement and capacitor reuse etc., the proposed LNA demonstrates 3 gain settings of 20dB, 6dB, -9dB with S11 below -12dB at every gain setting. At a power supply voltage of 2.5V, the LNA consumes less than 10mA current, -6dBm IIP3 and a Noise Figure (NF) of less than 2.9dB at 20dB gain setting over the VHF band.
منابع مشابه
Design of High Gain, High Reverse Isolation and High Input Matched Narrowband LNA for GPS L1 Band Applications Using 0.18µm Technology
Design of Global Positioning System (GPS) receiver with a low noise amplifier (LNA) in the front end remains a major design requirement for the success of modern day navigation and communication system. Any LNA is expected to meet the requirements like its ability to add the least amount of noise while providing sufficient gain, perfect input and output matching, and high linearity. However, mo...
متن کاملLinearity Improvement of Cascode Cmos Lna Using a Diode Connected Nmos Transistor with a Parallel Rc Circuit
A fully integrated 5.5 GHz high-linearity low noise amplifier (LNA) using post-linearization technique, implemented in a 0.18μm RF CMOS technology, is demonstrated. The proposed technique adopts an additional folded diode with a parallel RC circuit as an intermodulation distortion (IMD) sinker. The proposed LNA not only achieves high linearity, but also minimizes the degradation of gain, noise ...
متن کاملDesign of a New Low-Power 2.4 GHz CMOS LNA
A 2.4-GHz single-stage CMOS low noise amplifier (LNA) structure with ultra low power consumption is proposed. A current reuse technique is used to decrease power dissipation with increasing amplifier transconductance for the LNA. Thus, the same amplifier transconductance for the LNA will be achieved at decreased power dissipation. Also, due to the use of an inverter-type amplifier which has a s...
متن کاملA Millimeter-Wave (23-32 GHz) Wideband BiCMOS Low-Noise Amplifier
This paper presents a 23–32 GHz wideband BiCMOS low-noise amplifier (LNA). The LNA utilizes coupled-resonators to provide a wideband load. To our knowledge, the proposed LNA achieves the widest bandwidth with minimum power consumption using 0.18 m BiCMOS technology in K-band. Analytical expressions for the wideband input matching, gain, noise figure and linearity are presented. The LNA is imple...
متن کاملFully-integrated DECT/Bluetooth multi-band LNA in 0.18µm CMOS
The design of a multi-band low noise amplifier (LNA) is the first obstacle towards the design of a multi-standard receiver. In this paper, an approach for the design of a multi-band LNA for DECT and Bluetooth is presented. The formula for a minimal noise factor of a LNA, that takes into account the finite quality factor of the inductors is derived and the full design procedure that facilitates ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- JCP
دوره 8 شماره
صفحات -
تاریخ انتشار 2013