The shear strength of dental porcelain.

نویسندگان

  • W M Johnston
  • W J O'Brien
چکیده

The widespread use of porcelain in restorative dentistry is generally due to its esthetic appearance even though it is brittle. The transverse strength, or modulus rupture, averages around 108 MPa (16,000 psi) for aluminous porcelain and 88 MPa (13,000 psi) for feldspathic porcelain. The tensile strength, as determined by diametral compression, is approximately 29 MPa (4,200 psi) for opaque feldspathic porcelain and 40 MPa (5,800 psi) for gingival feldspathic porcelain. The compressive strength is reported to be 340 MPa (50,000 psi) for a feldspathic porcelain. These mechanical strength properties of dental porcelain confine its use to low stress-bearing restorations or to those restorations with a metal substrate.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Laboratory evaluation of shear bond strength of porcelain repair methods

Introduction: Porcelain fracture is a relatively common problem in clinical dental practice. Various methods have been proposed for repairing porcelain fractures including direct composite resin repair or construction of a porcelain laminate veneer and its cementation with a resin cement. Evaluation of shear bond strength of porcelain repair methods was the purpose of this study. Methods: Tw...

متن کامل

Comparison of the Effect of Nd:YAG Laser and Sandblasting on Shear Bond Strength of a Commercial Ni-Cr Alloy to Porcelain

Introduction: Failures might occur at metal‒porcelain interfaces as a problem with metal‒ceramic restorations even with the application of airborne-particle abrasion technique. This study was undertaken to evaluate the effect of Nd:YAG laser treatment on the bond strength of porcelain fused to metal. Methods:  Twenty-four cylindrical specimens (4 mm in diameter and 4 mm in height) were made of ...

متن کامل

The effect of flowable composite and resin cement on shear bond strength of porcelain veneer to enamel

The effect of flowable composite and resin cement on shear bond strength of porcelain veneer to enamel Dr. A. Esmaili * - Dr. A. Saboury ** - Dr. A. Ghassemi *** *Assistant Professor of Prosthodontics Dept., Faculty of Dentistry, Tabriz University of Medical Sciences. **Assistant Professor of Prosthodontics Dept., Faculty of Dentistry, Shaheed Beheshti University of Medical Sciences. ***Associa...

متن کامل

Comparison of the Effect of Three methods of Porcelain Surface Treatment on Shear Bond Strength of Composite to Porcelain

Background and Aim: Several methods are available for intraoral repair of chipped porcelain restorations by composite resin. Also, there is still controversy regarding the best method of porcelain repair in terms of bond strength and cost effectiveness. This study aimed to compare three methods of porcelain surface treatment on shear bond strength (SBS) of composite to porcelain. Materials a...

متن کامل

Shear Bond Strength of Porcelain Veneering to Nickel-Chromium, Chromium-Cobalt, Zirconia and Lithium Disilicate

Background and Aim: High chipping rates of the veneering porcelain in zirconia ce-ramic restorations have been reported in many clinical studies. However, information on the bonding behavior of veneering porcelain to zirconia and lithium disilicate frameworks is limited. The purpose of this study was to evaluate the bond-ing strength of porcelain veneering to zirconia, lithium disilicate, nicke...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of dental research

دوره 59 8  شماره 

صفحات  -

تاریخ انتشار 1980