Preparation and characterization of polymer/inorganic nanoparticle composites through electron irradiation
نویسندگان
چکیده
In this paper, we report a new method to prepare the polymer/inorganic nanoparticle composites using electron irradiation-induced polymerization. The mixture of nanoparticles and MMA solution were co-irradiated by 1.6 MeV electron beam to a dose of 10, 20 and 30 kGy at a dose-rate of 60 kGy/h in air at room temperature. The products after irradiation were extracted using a soxhlet extractor with boiling xylene and investigated by X-ray diffraction (XRD), Fourier transmission infrared (FTIR), X-ray photoelectron spectroscopy (XPS), optical absorption spectra (OAP) and photoluminescence (PL). The FTIR and XPS results show that there exist some unextractable PMMA in the nanocomposites after extraction, indicating a strong interaction between the PMMA and nanoparticles. PL results show that new luminescence peaks appear at 415 and 420 nm for the nanocomposites of anatase and γ -Al2O3.
منابع مشابه
Synthesis and characterization of optically active polyester thin-film bionanocomposite membrane achieved by functionalized cellulose /silica for gas permeation
Optically active bionanocomposite membranes composed of polyester(PE) and cellulose /silica bionanocomposite (BNCs) are a novel method to enhance gas separation performance. Commercially available silica nanoparticles were modified with biodegradable nanocellulose through ultrasonic irradiation technique. Transmission electron microscopy (TEM) analyses showed that the cellulose/silica composite...
متن کاملSynthesis and characterization of optically active polyester thin-film bionanocomposite membrane achieved by functionalized cellulose /silica for gas permeation
Optically active bionanocomposite membranes composed of polyester(PE) and cellulose /silica bionanocomposite (BNCs) are a novel method to enhance gas separation performance. Commercially available silica nanoparticles were modified with biodegradable nanocellulose through ultrasonic irradiation technique. Transmission electron microscopy (TEM) analyses showed that the cellulose/silica composite...
متن کاملSynthesis and Characterization of Polymer/Nanosilicagel Nano-composites
In this study, a polymer-silica nanocomposite using the sol-gel method was synthesized in three steps at room temperature. The nanocomposite material was formed with an organic compound (polyethylene glycol) and inorganic silica nanoparticles. Furthermore, the size and the distribution of nanoparticles in the polymer matrix were characterized by a transmission electron microscope (TEM). In add...
متن کاملPreparation and Characterization of ZrO2/TiO2 Nanocomposite under Ultrasonic Irradiation by Sol-gel Route
TiO2/ZrO2 nanocomposite was obtained by the sonochemical technique. In this method, two separate gels containing zirconium and titanium were prepared and mixed together. The precursor sol of zirconium was prepared from an aqueous solution of ZrCl4. The precursor titanium tetra isopropoxide (TTIP) dissolved in isopropanol. Mixing of Titanium and Zirconium gels was resulted in a yellow TiO2/ZrO2 ...
متن کاملPreparation and Characterization of ZrO2/TiO2 Nanocomposite under Ultrasonic Irradiation by Sol-gel Route
TiO2/ZrO2 nanocomposite was obtained by the sonochemical technique. In this method, two separate gels containing zirconium and titanium were prepared and mixed together. The precursor sol of zirconium was prepared from an aqueous solution of ZrCl4. The precursor titanium tetra isopropoxide (TTIP) dissolved in isopropanol. Mixing of Titanium and Zirconium gels was resulted in a yellow TiO2/ZrO2 ...
متن کامل