Examination of the three-dimensional geometry of cetacean flukes using computed tomography scans: hydrodynamic implications.

نویسندگان

  • Frank E Fish
  • John T Beneski
  • Darlene R Ketten
چکیده

The flukes of cetaceans function in the hydrodynamic generation of forces for thrust, stability, and maneuverability. The three-dimensional geometry of flukes is associated with production of lift and drag. Data on fluke geometry were collected from 19 cetacean specimens representing eight odontocete genera (Delphinus, Globicephala, Grampus, Kogia, Lagenorhynchus, Phocoena, Stenella, Tursiops). Flukes were imaged as 1 mm thickness cross-sections using X-ray computer-assisted tomography. Fluke shapes were characterized quantitatively by dimensions of the chord, maximum thickness, and position of maximum thickness from the leading edge. Sections were symmetrical about the chordline and had a rounded leading edge and highly tapered trailing edge. The thickness ratio (maximum thickness/chord) among species increased from insertion on the tailstock to a maximum at 20% of span and then decreasing steadily to the tip. Thickness ratio ranged from 0.139 to 0.232. These low values indicate reduced drag while moving at high speed. The position of maximum thickness from the leading edge remained constant over the fluke span at an average for all species of 0.285 chord. The displacement of the maximum thickness reduces the tendency of the flow to separate from the fluke surface, potentially affecting stall patterns. Similarly, the relatively large leading edge radius allows greater lift generation and delays stall. Computational analysis of fluke profiles at 50% of span showed that flukes were generally comparable or better for lift generation than engineered foils. Tursiops had the highest lift coefficients, which were superior to engineered foils by 12-19%. Variation in the structure of cetacean flukes reflects different hydrodynamic characteristics that could influence swimming performance.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Lift and drag performance of odontocete cetacean flippers.

Cetaceans (whales, dolphins and porpoises) have evolved flippers that aid in effective locomotion through their aquatic environments. Differing evolutionary pressures upon cetaceans, including hunting and feeding requirements, and other factors such as animal mass and size have resulted in flippers that are unique among each species. Cetacean flippers may be viewed as being analogous to modern ...

متن کامل

Three-Dimensional Computed Tomography Diagnosis of Cranium Bifidum with Meningocele in a Lamb

Abstract   Case Description- A three-day-old male Kordi lamb had a soft painless fluctuating mass on the mid-parietal region, with no clinical signs except difficulty in standing; was referred to the clinic. Clinical Findings- Clinical examination revealed a normal body temperature, a heart rate, a respiratory rate, and inability to stand without any congenital defects Three-dimensional comp...

متن کامل

Accuracy and reliability of cetacean cranial measurements using computed tomography three dimensional volume rendered images

Computed tomography (CT) has become more readily available for post-mortem examination, offering an alternative to cetacean cranial measurements obtained manually. Measurement error may result in possible variation in cranial morphometric analysis. This study aimed to evaluate the accuracy and reliability of cetacean cranial measurements obtained by CT three-dimensional volume rendered images (...

متن کامل

Passive cambering and flexible propulsors: cetacean flukes.

The flukes are the primary locomotor structure in cetaceans, which produce hydrodynamic thrust as the caudal vertebrae are oscillated dorso-ventrally. Effective thrust generation is a function of the kinematics of the flukes, the angle of attack between the flukes and the incident water flow, and the shape of the flukes. We investigated the effect of bending within the caudal region of odontoce...

متن کامل

Three-dimensional reconstruction of New Zealand rabbit antebrachium by multidetector computed tomography

The aim of this study was to reveal biometric peculiarities of New Zealand white rabbit antebrachium (radius and ulna) by means of three-dimensional (3D) reconstruction of multidetector computed tomography (MDCT) images. Under general anesthesia, the antebrachiums of a total of sixteen rabbits of both sexes were scanned with a general diagnostic MDCT. Biometric measurements of the reconstructed...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Anatomical record

دوره 290 6  شماره 

صفحات  -

تاریخ انتشار 2007