Time Resolved In Situ Tvj Measurements of 6.5kV IGBTs during Inverter Operation

نویسندگان

  • Waleri Brekel
  • Thomas Duetemeyer
  • Gunnar Puk
  • Oliver Schilling
چکیده

Although the device temperature is one of the most critical parameters in the dimensioning of an inverter, experimental studies focusing on the virtual junction temperature (Tvj) in running inverter are scarcely found. In this work the feasibility of four different practical methods is compared. Special focus is set on routines with a high time resolution that enables tracking of the time-dependent-temperature during one period of the sinusoidal output current. Details of the procedures are explained and compared with simulations.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Five-Level Common-Emitter Inverter Using Reverse-Blocking IGBTs

In a high switching frequency operation of current-source inverter (CSI), a conventional way to obtain unidirectional power switches is by connecting discrete diodes in series with the high speed power switches, i.e. power MOSFETs or IGBTs. However, these discrete diodes will cause extra losses to the power converter. This paper presents experimental test results of high switching frequency fiv...

متن کامل

Implementation of Cascaded H Bridge Inverter for Single Phase Ac Motor Drive

This paper presents the implementation of Single Phase 7 level Multilevel DC link (MLDCL) Inverter with Half Bridge Cell topology. For N level inverter, (N-1)/2 half bridge cells are required with the same number of voltage sources. In this inverter topology, 3 Half Bridge Cells are used along with 3 voltage sources, each have 100V DC. These half bridges are connected in series to form a Multil...

متن کامل

AN-1045b AC TIG Inverter.p65

Introduction Balancing mechanisms Application on TIG welding Paralleling IR standard speed IGBTs Full Bridge Inverter Power circuit Half-Bridge Inverter Output inverter stages Transient voltage and output rectifier Multi-process welding Advantages of paralleling IGBTs Mounting instructions Current and temperature unbalance ESD and correct handling Thermal runaway Discrete devices approach Concl...

متن کامل

Sensitivity of Input Blocking Capacitor on Output Voltage and Current of a PV Inverter Employing IGBTs

This paper present a MATLAB-SIMULINK model of a single phase 2.5 KVA, 240V RMS controlled PV VSI (Photovoltaic Voltage Source Inverter) inverter using IGBTs (Insulated Gate Bipolar Transistor). The behavior of output voltage, output current, and the total harmonic distortion (THD), with the variation in input dc blocking capacitor (Cdc), for linear and non-linear load has been analyzed. The val...

متن کامل

Design and Evaluation of an Efficient Three-Phase Four-Leg Voltage Source Inverter with Reduced IGBTs

This paper presents a new three-phase four-leg voltage source inverter (VSI), which achieves a high cost effectiveness for mega-watt level system applications. The proposed four-leg inverter adopts the integrated topology with thyristors and insulated-gate bipolar transistors (IGBTs), which aims to reduce the number of IGBTs. In order to handle the zero sequence current, a neutral leg via incor...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2009