The effect of cooling rate on hydrogen release from a pyrolytic carbon coating and its resulting morphology
نویسندگان
چکیده
[1] Liu C, Cheng HM, Cong HT, Li F, Su G, Zhou BL, et al. Synthesis of macroscopically long ropes of well-aligned single-walled carbon nanotubes. Adv Mater 2000;12(16):1190–2. [2] Nikolaev P, Bronikowski M, Bradley RK, Rohmund F, Colbert DT, Smith KA, et al. Gas-phase catalytic growth of single-walled carbon nanotubes from carbon monooxide. Chem Phys Lett 1999;313(1–2): 91–7. [3] Hata K, Futaba DN, Mizuno K, Namai T, Yumura M, Iijima S. Water-assisted highly efficient synthesis of impurity-free single-walled carbon nanotubes. Science 2004;306(5700):1362–4. [4] Itkis ME, Perea DE, Niyogi S, Love J, Tang J, Yu A, et al. Optimization of the Ni–Y catalyst composition in bulk electric arc synthesis of single-walled carbon nanotubes by use of near-infrared spectroscopy. J Phys Chem B 2004;108(34):12770–5. [5] Kong J, Soh HT, Cassell AM, Quate CF, Dai HJ. Synthesis of individual single-walled carbon nanotubes on patterned silicon wafers. Nature 1998;395(6705):878–81. [6] Cheung CL, Kurtz A, Park H, Lieber CM. Diameter-controlled synthesis of carbon nanotubes. J Phys Chem B 2002;106(10): 2429–33. [7] Landi BJ, Ruf HJ, Evans CM, Cress CD, Raffaelle RP. Purity assessment of single-wall carbon nanotubes, using optical absorption spectroscopy. J Phys Chem B 2005;109(20):9952–65. [8] Lv X, Du F, Ma YF, Wu Q, Chen YS. Synthesis of high quality single-walled carbon nanotubes at large scale by electric arc using metal compounds. Carbon 2005;43(9):2020–2. [9] Gorbunov A, Jost O, Pompe W, Graff A. Solid-liquid-solid growth mechanism of single-wall carbon nanotubes. Carbon 2002;40(1): 113–8. [10] Rao AM, Chen J, Richter E, Schlecht U, Eklund PC, Haddon RC, et al. Effect of van der Waals interactions on the raman modes in single walled carbon nanotubes. Phys Rev Lett 2001;86(17): 3895–8.
منابع مشابه
The Effect of Simultaneous Incorporation of PTFE Nanoparticles and Carbon Nanotubes on the Tribological Behavior of Ni-P Coating
In some engineering fields, wear resistance and a low friction coefficient are required at the sametime. In this research, PTFE nanoparticles and carbon nanotubes were co-deposited within Ni-Pmatrix to obtain an Ni-P-PTFE-CNT hybrid coating for wear resistance and a low friction coefficient.The tribological properties of the deposits were evaluated by pin on disc tribometer. T...
متن کاملStructure and Properties of Pyrolytic Carbon: Recent Developments and Hidden Potentials
Recent developments on the relationship between the complex microstructure of pyrolytic carbon coatings and the pyrolysis conditions are reviewed. Pyrolytic carbon coatings deposited on carbon fibers and non-carbon substrates are studied comparatively by light microscopy, scanning electron microscopy and transmission electron microscopy combined with selected-area electron diffraction. Opticall...
متن کاملApplication of mesoporous silica containing benzotriazole in the epoxy coating applied to plain carbon steel and study of its corrosion behavior
The idea of smart inhibitors is based on the principle that an inhibitor is used where needed. This will reduce the use of inhibitors and protect materials in hostile environments. On the other hand, direct addition of the inhibitor within the coating can be harmful, resulting in the loss of inhibitors ability, deterioration in the coating or both of them. An appropriate method for solving thes...
متن کاملEffect of Aluminum on Microstructure and Thickness of Galvanized Layers on Low Carbon silicon-Free Steel
In hot dip galvanizing, several parameters such as chemical composition of coating bath, immersion time and surface roughness of specimens could affect microstructure and properties of coating. In this article, the effect of aluminum content, immersion time and surface roughness on structure and properties of alloy layers have been investigated. Specimens of low carbon silicon-free steel with d...
متن کاملInvestigation of Hardness, Morphology and Structural Analysis of NiCrBSi Composite Coating on Plain Carbon Steel
High velocity oxy-fuel (HVOF) is one of the emerging technologies among the thermal spraying techniques, for producing uniform and dense coatings, having high hardness and very low porosity. A NiCrBSi alloy coating was prepared with approximately 400µm thick, on the A516 steel by means of HVOF and was analyzed with regard to its detailed microstructures, phase formation, thickness, roughness an...
متن کامل