Comparison of Multiphase Pumping Technologies for Subsea and Downhole Applications

نویسنده

  • Gong Hua
چکیده

The selection criteria for multiphase boosting options remain somewhat subjective and are frequently influenced by the vendors’ data, which may mask potential limitations of this emerging technology. Existing literature on multiphase pumping tends to focus on a certain pump type for a specific field application, but does not provide more-generalized criteria for the selection of multiphase boosting solutions from among those available in the market. A comprehensive literature review into the working principles of the major pump types identified the intrinsic advantages and limitations of each technology for subsea and downhole applications. The survey showed that, for subsea application, both the twinscrew pump (TSP) and the helicoaxial pump (HAP) can handle high suction gas volume fraction (GVF) with a fluid recycling system, or flow mixer. Thus, GVF is not a discriminating factor. The positive-displacement principle allows TSPs to work with very low suction pressure, but limits their operating range because of the dependency of flow rate on their relatively low speed. However, these pumps can handle highly viscous fluid. The rotodynamic concept enables the differential pressure of HAPs to self-adjust to any instantaneous change in suction GVF, and to achieve higher flow rate if sufficient suction pressure is maintained. Because HAPs usually run at higher speed, they offer a wider operating range. For subsea application, HAPs appear to be a better option than TSPs because they offer higher operation flexibility and have a better installation track record. For downhole applications, the electrical submersible pump (ESP) and the progressing-cavity pump (PCP) are the outstanding favorites, with the latter being preferred for lifting streams that are viscous or with high sand content. For GVF up to 70%, the rotodynamic pump (RDP) is becoming a popular solution. Although it is claimed that the downhole TSP (DTSP) can handle up to 98% GVF, it is not yet widely accepted in the field.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A review on recent applications of brushless DC electric machines and their potential in energy saving

Electric motors are the largest consumer of world electric energy, consuming more than twice as much as lighting, the next largest consumer. Electric motors account for between 43 and 46% of all global electricity consumption approximately. They give rise to about 6 040 Mt of CO2 emissions. End‐users approximately spend USD 565 billion per year on electricity [1]. In recent years, increase in e...

متن کامل

A review on recent applications of brushless DC electric machines and their potential in energy saving

Electric motors are the largest consumer of world electric energy, consuming more than twice as much as lighting, the next largest consumer. Electric motors account for between 43 and 46% of all global electricity consumption approximately. They give rise to about 6 040 Mt of CO2 emissions. End‐users approximately spend USD 565 billion per year on electricity [1]. In recent years...

متن کامل

A CFD Simulation of the Parameters Affecting the Performance of Downhole De-oiling Hydrocyclone

Among the all parameters affecting the performance of a downhole de-oiling hydrocyclone, the investigation of internal flow field deserves more attempts especially in the petroleum industry. In this study, the effects of inlet flow rate, inlet oil volume fraction, and oil droplet diameter on the separation efficiency and pressure drop ratio have been investigated along the hydrocyclone body. Al...

متن کامل

Implementation and Long-step Sensorless Control of Permanent Magnet Synchronous Machines (pmsm) for Subsea Applications

By design, the operation of a large 3MW permanent magnet motor-driven pump system has the potential to improve system efficiency and reliability to lower operator costs. Subsea electrical system design and motor performance must be predictable and validated prior to deployment. Critical elements of this system include successful remote start-up and step up–step down transformers. A number of di...

متن کامل

Control Solutions for Subsea Processing and Multiphase Transport

To increase the oil production for the Tordis subsea oilfield located at the Norwegian Continental Shelf, a subsea separation and boosting station will be installed. Most of the water will be injected into a subsea reservoir instead of being transported up to the platform. Several challenges conserning process control need to be addressed before the implementation process, and dynamic simulatio...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012