Comparison Between Finite and Boundary Element Methods for Analysis of Electrostatic Field Around Human Head Generated by Video Display Units
نویسندگان
چکیده
Boundary and finite element modeling approach to the assessment of electrostatic field on human head generated by Video Display Units (VDU’s) are compared and discussed. Attention is focused to the field distribution over the surface of the face. The mathematical formulation for the assessment of the electrostatic field is based on the Laplace equation for the electric scalar potential. The electrostatic field is calculated for two different models of face. Numerical results are presented and compared in order to estimate the accuracy and computational efficiency of the two methods for the considered problem. In order to make comparison as meaningful as possible, boundary and finite element codes have been both developed by the authors. In general, boundary element appears to be the better choice than finite element with respect to computational efficiency and level of accuracy.
منابع مشابه
Electrostatic analysis of the charged surface in a solution via the finite element method: The Poisson-Boltzmann theory
Electrostatic potential as well as the local volume charge density are computed for a macromolecule by solving the Poisson-Boltzmann equation (PBE) using the finite element method (FEM). As a verification, our numerical results for a one dimensional PBE, which corresponds to an infinite-length macromolecule, are compared with the existing analytical solution and good agreement is found. As a ma...
متن کاملاثر پدیده EHD بر کنترل لایه مرزی ورقهای روی استوانه به کمک دو الکترود سیمی و دو الکترود نواری چسبیده به سطح استوانه
One of the ways, to control of the drag forces applying to the circular cylinder in the air flow, is control of the generated boundary layer around the cylinder, and one of the new and effective ways for control of the boundary layer, is using high voltage electrostatic field in fluid flow. In these conditions, because of the coupled relations between electric field and momentum equations, th...
متن کاملSimulation and Experimental Study of Vibration and Noise of Pure Electric Bus Transmission based on Finite Element and Boundary Element Methods
Since the electric motor of pure electric vehicle replaced the engine, the "masking effect" disappears, and the problem of vibration and noise of the transmission becomes prominent. This is generated during the gear meshing and is transmitted to the housing through the shaft and bearing. Thereby, radiation noise of the housing are generated. The prediction and analysis...
متن کاملFinite element modeling of the human head under baton impact
Purpose: This research will try to predict damage probability and calculate the main stress resulted from baton impacts by finite element (FE) modeling of the human head considering skull texture, brain and cerebrospinal fluid.Materials and Methods: A three dimensional FE model of the skull-brain complex was constructed for simulating the baton impact. The FE analysis was carried out using ANSY...
متن کاملApplication of Decoupled Scaled Boundary Finite Element Method to Solve Eigenvalue Helmholtz Problems (Research Note)
A novel element with arbitrary domain shape by using decoupled scaled boundary finite element (DSBFEM) is proposed for eigenvalue analysis of 2D vibrating rods with different boundary conditions. Within the proposed element scheme, the mode shapes of vibrating rods with variable boundary conditions are modelled and results are plotted. All possible conditions for the rods ends are incorporated ...
متن کامل