Industrial Investigations of the Liquid Steel Filtration
نویسنده
چکیده
K. Janiszewski, B. Panic: Silesian University of Technology, Department of Metallurgy, Katowice, Poland Hitherto existing investigations concerning the ceramic fi lter use in the steel making processes have given good results. The obtained results of fi ltration have proved that this method may be used as an eff ective and cheap way of steel fi ltration from non-metallic inclusions. Placing fi lters in the tundish is the best location considering the limitation of the possibility of secondary pollution of steel. Yet, the results presented in this paper, of an experiment prepared and carried out in the industrial environment, are the only positive results obtained, which are connected with so much quantities of liquid steel processed with use of the multi-hole ceramic fi lters.
منابع مشابه
Industrial Application of Liquid Steel Filtration out of Dispersed Nonmetallic Phase in the Continuous Casting Machine
K. Janiszewski, Silesian University of Technology, Department of Metallurgy, Katowice, Poland. Hitherto existing investigations concerning the ceramic fi lter use in the steel making processes (both of laboratory and industrial scale) have given good results. The obtained results of fi ltration (in the laboratory) have proved that this method may be used as an eff ective and cheap way of steel ...
متن کاملNumerical and Physical Modelling of Steel Flow in a One-strand Continuous Casting Tundish
Constantly increasing customers demands for the production of high and very high-quality steels, promote the intensive technological development of their production. Since the dominating method of global steel production is continuous casting, the tundish has become very important metallurgical unit. Nowadays, tundish is not only a storage vessel which guaranty the continuous casting of steel, ...
متن کاملWater Modeling of Steel Flow, Air Entrainment and Filtration
This paper presents an analysis of water modeling of steel pouring to study (1) air entrainment and (2) filter effectiveness to remove reoxidation inclusions. In the first part, a review is presented of the physical processes and parameters important in air entrainment in free-surface flows. Then, the use of a water system to model air entrainment in steel pouring is analyzed. Attention is focu...
متن کاملAn Investigation on Mechanical Properties of Ultrafine Grained 316 Stainless Steel by Thermomechanical Treatment
In this paper, an advanced thermo-mechanical treatment was conducted on AISI 316 austenitic stainless steel. At first, three samples were rolled at the ambient temperature, the temperature of -20 ºC (dry ice and ethanol) and -196 ºC (liquid nitrogen). Then, the samples were annealed at 800 ºC in the time range of 1 to 15 minutes. In each step, the microhardness values of the samples were measur...
متن کاملEffect of bonding temperature on the microstructure and electrochemical corrosion behavior of TLP bonded AISI 304L stainless steel
Transient liquid phase (TLP) bonding of AISI 304L stainless steel was carried out using BNi-2 amorphous interlayer. The microstructure of the joint area was studied by using optical and scanning electron microscopes and energy dispersive spectroscopy. The effect of bonding temperature (1030-1110 °C) was studied on the microstructure and corrosion behavior of the TLP bonded samples. Electrochemi...
متن کامل