Study of the Yellow Organic Light Emitting Diodes using ZnS/Metal/ZnS Multilayer Anodes and Investigation of the Effect of BCP on Electroluminescent Spectra of the Devices

نویسندگان

  • A. Behjat
  • M. Neghabi
چکیده

The effects of ZnS/Metal/ZnS multilayer anodes, including ZnS/Au/ZnS (ZAuZ), ZnS/Ag/ZnS (ZAgZ) and ZnS/Cu/ZnS (ZCuZ) on device performance in organic light emitting diodes based on rubrene were investigated systematically. The device with ZAuZ as anode gave an improved performance comparable with ITO based devices. A low driving voltage of 5.61 V and a high luminance of 1836 cd/m were obtained in the ZAuZ based device. Then the effect of BCP as hole blacking layer on emissive spectra of ZAuZ based OLEDs was investigated and white spectra with (0.32,0.31) colour coordinates was obtained for ZAuZ/PEDOT:PSS/TPD/BCP/Rubrene/BCP/BPhen/LiF/Al multilayer structure.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Thin-film Encapsulation of Organic Light-Emitting Diodes Using Single and Multilayer Structures of MgF2, YF3 and ZnS

In this research, the lifetime of green organic light emitting diodes (OLEDs) is studied using four passivation layers. To encapsulate the OLEDs, MgF2, YF3, composed of alternating MgF2/ZnS and YF3/ZnS layers were grown by thermal vacuum deposition. Measurements show that the device lifetime is significantly improved by using YF3 and ZnS as passivation layers. However, diodes encapsulated by Mg...

متن کامل

Influences of Device Architectures on Characteristics of Organic Light-Emitting Devices Incorporating Ambipolar Blue-Emitting Ter(9,9-diarylfluorenes)

In this article, we report the studies of various device architectures of organic lightemitting devices (OLEDs) incorporating highly efficient blue-emitting and ambipolar carriertransport ter(9,9-diarylfluorene)s, and their influences on device characteristics. The device structures investigated include single-layer devices and multilayer heterostructure devices employing the terfluorene as one...

متن کامل

Fabrication of a white electroluminescent device based on bilayered yellow and blue quantum dots.

Until now most work on colloidal quantum dot-light-emitting diodes (QLEDs) has been focused on the improvement of the electroluminescent (EL) performance of monochromatic devices, and multi-colored white QLEDs comprising more than one type of QD emitter have been rarely investigated. To demonstrate a white EL as a result of color mixing between blue and yellow, herein a unique combination of tw...

متن کامل

Improved efficiencies in organic light emitting diodes made with CdSe/ZnS quantum dots and a semiconducting polymer.

In this study, we report the fabrication and characterization of organic/inorganic hybrid polymer light emitting diodes (PLEDs) made with ZnS-capped CdSe core/shell type nanocrystals and a light-emitting polymer poly[2-phenyl-3-(9,9-dihexylfluoren-2-yl)-1,4-phenylene vinylene]-co-[2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylene vinylene]. The device using pristine polymer as active layer emitted y...

متن کامل

Parameters of ZnS/Metal/ZnS nanostructured systems with different metal layers

ZnS/metal/ZnS (ZMZ) nanomultilayer films with Au, Ag and Cu as a metal layer have been deposited on a glass substrate by thermal evaporation and then, were annealed in air at different temperatures from 100 to 300 ºC for one hour. Several analytical tools such as X-ray diffraction, four point probe and spectrophotometer were used to study the changes in structural, electrical and optical proper...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012