Design and Operating Experience with High Temperature and High Pressure Refuse·fired Power Boilers
نویسنده
چکیده
The typical U.S. refuse-to-energy facility utilizes a 600 psig, 750°F steam cycle. The ability to operate at higher steam pressure and temperature cycles, without incurring excessive corrosion, results in more kilowatts per ton of refuse and, hence, more economically at tractive projects. This paper represents the evolution of a 900 psig, 830°F refuse boiler from lower temper ature and pressure cycles, and the operating experience gained through the processing of over 4,500,000 tons of refuse.
منابع مشابه
Hybrid Fuzzy-PID Application in Boilers to Obtain Optimum Efficiency
Many real time processes have complex, uncertain and nonlinear dynamics. Boilers are nonlinear, time varying, multi-input multi-output (MIMO) systems, whose states generally vary with operating conditions. The major problem in controlling that system is that its drum water pressure and steam flow dynamics include an integrator that results a critically stable behavior. Conventional controller p...
متن کاملThermodynamic Assessment and Parametric Study of a Supercritical Thermal Power Plant
A thermodynamic analysis of an operational 315 MW supercritical steam power plant (SPP) using the actual data is performed to assess the plant performance and identify the sites of energy losses and exergy destructions in each component of the plant. Various performance parameters such as component energy and exergy efficiencies, energy loss rate, exergy destruction rate, improvement potential ...
متن کاملIndustrial Combustion Boilers
PROCESS AND TECHNOLOGY STATUS – Combustion boilers are widely used to generate steam for industrial applications and power generation. While all kinds of energy sources fossil fuels, biomass, nuclear and solar energy, electricity can be used to generate heat and steam, the scope of this brief is limited to combustion boilers using fossil fuels and biomass. Boilers can be grouped into two broad ...
متن کاملDesign and implementation of high voltage square wave power source with variable DC-offset and study its effect on atmospheric-pressure plasma
Nowadays high-voltage power sources is used in different areas such as generation of atmospheric-pressure plasma. Different voltage waveforms affect the plasma generation and its quality. In this paper a new high voltage square wave with DC-offset power source is presented to study the different parameters on plasma generation and propagation. The proposed converter which is based on power semi...
متن کاملThermal Analysis of Turbocharger Steel Gasket via Experimental Test
Increasing the power (torque) of nowadays engines, along with reduction of fuel consumption and dimensions of them, cause to the use of turbocharged systems. Since turbo chargers are exposed to the exhaust hot gases and have a high operating speed, it is necessary to utilize high technology design and special materials with high cost. The temperature of the exhaust system with gasoline fuel som...
متن کامل