Comparison of mechanical properties of the Zro2 and TiO2 filler epoxy composite
نویسندگان
چکیده
---------------------------------------------------------------------***--------------------------------------------------------------------Abstract Effect of TiO2 and ZrO2 filler on mechanical properties of the epoxy polymer has been investigated experimentally. TiO2 and ZrO2 filler epoxy composites are fabricated by hand layup technique in a mold and cured under light pressure at room temperature for 48 hour indivisibly. Specimen preparation and testing was carried out as per ASTM standards. The results indicated that the due to the filler addition the mechanical properties of the epoxy composites is enhances the best resistance observed in the ZrO2 filler composites. The strength variation is observed in the trend of plain>petrel>diesel>mineral>saline in Both tensile and flexural.
منابع مشابه
The Impact of Current Density of Electroplating on Microstructure and Mechanical Properties of Ni-ZrO2-TiO2 Composite Coating
Metallic composite coatings with ceramic particles can be used to improve the mechanical and corrosion properties of steel. In the present research, Ni-ZrO2-TiO2 composite coating was fabricated on AISI 430 stainless steel through the electrodeposition method. The effect of the current density of electroplating (15, 17, 20, and 23 mA.cm-2)was investigated on the...
متن کاملExperimental Study of The Mechanical Properties of Banana Fiber and Groundnut Shell Ash Reinforced Epoxy Hybrid Composite
Effect of addition of filler material to the natural fiber composite was experimentally investigated. Composites are manufactured by the conventional hand-layup method. All composites are made with a fixed banana fiber with 15% weight fraction addition of different weight fraction of (0, 3, 5, 7.5%) groundnut shell ash is added to the composite. Tensile, hardness, impact and compressive strengt...
متن کاملPreparation and characterization of Epoxy/Lead oxide nano-composite for shield against gamma and X-rays
Polymer nano-composites are a group of materials that represent proper mechanical, chemical, thermal and optical properties due to the presence of certain percentages of a filler in a polymeric matrix. In this study lead oxide nanoparticles were prepared by direct precipitation method. Then the lead oxide-epoxy resin nanocomposite was prepared by mixing (without solvent) with different weight p...
متن کاملExperimental Study on Double-Walled Copper and Carbon/Epoxy Composite Tubes under the Axial Loading
This paper investigates axial compression process of multi-layered tubes with circular cross-section under the axial loading in the quasi-static condition using experimental method. Some specimens are prepared in seven different groups, namely; empty carbon/epoxy composite tubes, solid carbon/epoxy composite rods, empty copper tubes, composite tubes with silicon sealant filler, concentrically s...
متن کاملEffect of Micro Glass Flake on Morphological and Rheological Behaviour of Epoxy Vinyl Ester Composite Coatings
In the present work, attempts were made to investigate the reinforcement and treatment effect of GF on morphological and rheological behaviour of GF/epoxy vinyl ester composites. GF was incorporated into epoxy vinyl ester resin by sonication, and mechanical agitation. Rheological and morphological properties were studied as a function of particle treatment and size distributions. The dispersion...
متن کامل