Optimized removal of the tongue-and-groove underdose via constrained partial synchronization and variable depth recursion.
نویسنده
چکیده
Full synchronization (FS) leaf sequencing removes tongue-and-groove underdosages (TGU) but increases the number of segments. Constrained partial synchronization (CPS) uses a minimum tongue-and-groove ratio (TGR) to reduce the number of segments while achieving acceptable TGUs. TGR is the ratio of non-overlapping intensities that irradiate a common junction. For TGRs of 1, 1.5 and 2, the TGUs were measured as 18%, 4% and 0%, respectively, for a 6 MV beam and a Siemens 82 leaf MLC. The extraction and sweep processes of the variable depth recursion (VDR) leaf-sequencing algorithm were constrained to satisfy a minimum TGR. For a Siemens MLC and 15 clinical cases, VDR with a TGR = 1.5 produced 7% more segments than the unsynchronized VDR, while a fully synchronized sweeping window algorithm produces 62% more segments. For random intensity maps, VDR with CPS produced significantly fewer segments than an unsynchronized sweeping window. Similar results can be obtained for MLCs that interdigitate. This has implications for direct aperture optimization algorithms (DAO) that use the sweeping window as a starting point (Pinnacle), for which a significant TGU has been observed. The concept of CPS can be applied to DAO by choosing appropriate levels for each of the segments in DAO.
منابع مشابه
Multi-objective optimization of geometrical parameters for constrained groove pressing of aluminium sheet using a neural network and the genetic algorithm
One of sheet severe plastic deformation (SPD) operation, namely constrained groove pressing (CGP), is investigated here in order to specify the optimum values for geometrical variables of this process on pure aluminium sheets. With this regard, two different objective functions, i.e. the uniformity in the effective strain distribution and the necessary force per unit weight of the specimen, are...
متن کاملEffect of HPT and CGP Processes on the Copper Me-chanical Properties
One of the most common methods for production of ultra fine grained materials is severe plastic deformation (SPD). In this study, constrained groove pressing (CGP) and high pressure torsion (HPT) processes as effective methods of severe plastic deformation for the strain imposed on the pure copper were used. This paper presents the results of an experimental research, to review the influence of...
متن کاملAnalytical and Numerical Investigation of Significant Parameters on Strength of Electromagnetically Assembled Products Joints
Electromagnetic forming is a high energy rate forming process. In this process, an electromagnetic Lorentz body force is used for deformation of products. In this article, Electromagnetic forming process was simulated for assembly of parts as an innovative method. In this research work, the effect of important parameters of process such as discharge energy, radius and width of rectangular groov...
متن کاملAnalytical and Numerical Investigation of Significant Parameters on Strength of Electromagnetically Assembled Products Joints
Electromagnetic forming is a high energy rate forming process. In this process, an electromagnetic Lorentz body force is used for deformation of products. In this article, Electromagnetic forming process was simulated for assembly of parts as an innovative method. In this research work, the effect of important parameters of process such as discharge energy, radius and width of rectangular groov...
متن کاملAnalytical and Numerical Investigation of Significant Parameters on Strength of Electromagnetically Assembled Aluminum Tube Joints
Electromagnetic forming is a high energy rate forming process in which an electromagnetic Lorentz body force is used for deformation of products. In this article, electromagnetic forming process was simulated for the assembly of parts as an innovative method. The effect of important process parameters such as discharge energy, radius and width of rectangular groove on the strength of the asse...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Physics in medicine and biology
دوره 54 5 شماره
صفحات -
تاریخ انتشار 2009