Noise Factors , Dispersion Effects , and Robust Design

نویسندگان

  • David M. Steinberg
  • Dizza Bursztyn
  • DIZZA BURSZTYN
چکیده

There has been great interest recently in the use of designed experiments to improve quality by reducing the variation of industrial products. A major stimulus has been Taguchi’s robust design scheme, in which experiments are used to detect factors that affect process variation. We study here one of Taguchi’s novel ideas, the use of noise factors to represent varying conditions in the manufacturing or use environment. We show that the use of noise factors can dramatically increase power for detecting factors with dispersion effects, provided the noise factors are explicitly modeled in the subsequent analysis.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Design of robust carrier tracking systems in high dynamic and high noise conditions, with emphasis on neuro-fuzzy controller

The robust carrier tracking is defined as the ability of a receiver to determine the phase and frequency of the input carrier signal in unusual conditions such as signal loss, input signal fading, high receiver dynamic, or other destructive effects of propagation. An implementation of tight tracking can be understood in terms of adopting a very narrow loop bandwidth that contradict with the req...

متن کامل

A weighted metric method to optimize multi-response robust problems

In a robust parameter design (RPD) problem, the experimenter is interested to determine the values of con-trol factors such that responses will be robust or insensitive to variability of the noise factors. Response sur-face methodology (RSM) is one of the effective methods that can be employed for this purpose. Since quality of products or processes is usually evaluated through several quality ...

متن کامل

Optimization of Hardness Strengths Response of Plantain Fibres Reinforced Polyester Matrix Composites (PFRP) Applying Taguchi Robust Design

Volume fraction of fibres (A), aspect ratio of fibres (B) and fibres orientation (C) are considered as control factors in the determination of hardness strength, hardness strength of plantain fiber reinforced polyester composites (PFR P). These properties were determined for plantain empty fruit bunch (PEFB) and plantain pseudo stem (PPS). Hardness tests were conducted on the replicated samples...

متن کامل

Design of Nonlinear Robust Controller and Observer for Control of a Flexible Spacecraft

Two robust nonlinear controllers along with a nonlinear observer have been developed in this study to control a 1D nonlinear flexible spacecraft. The first controller is based on dynamic inversion, while the second one is composed of dynamic inversion and µ-synthesis controllers. The extension of dynamic inversion approach to flexible spacecraft is impeded by the non-minimum phase characteristi...

متن کامل

A Two-Phase Robust Estimation of Process Dispersion Using M-estimator

Parameter estimation is the first step in constructing any control chart. Most estimators of mean and dispersion are sensitive to the presence of outliers. The data may be contaminated by outliers either locally or globally. The exciting robust estimators deal only with global contamination. In this paper a robust estimator for dispersion is proposed to reduce the effect of local contamination ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2003