Novel Arrangements for High Performance and Durable Dielectric Elastomer Actuation
نویسندگان
چکیده
This paper advances the design of Rod Pre-strained Dielectric Elastomer Actuators (RP-DEAs) in their capability to generate comparatively large static actuation forces with increased lifetime via optimized electrode arrangements. RP-DEAs utilize thin stiff rods to constrain the expansion of the elastomer and maintain the in-plane pre-strain in the rod longitudinal direction. The aim is to study both the force output and the durability of the RP-DEA. Initial design of the RP-DEA had poor durability, however, it generated significantly larger force compared with the conventional DEA due to the effects of pre-strain and rod constraints. The durability study identifies the in-electro-active-region (in-AR) lead contact and the non-uniform deformation of the structure as causes of pre-mature failure of the RP-DEA. An optimized AR configuration is proposed to avoid actuating undesired areas in the structure. The results show that with the optimized AR, the RP-DEA can be effectively stabilized and survive operation at least four times longer than with a conventional electrode arrangement. Finally, a Finite Element simulation was also performed to demonstrate that such AR design and optimization can be guided by analyzing the DEA structure in the state of pre-activation.
منابع مشابه
Avoiding the pull-in instability of a dielectric elastomer film and the potential for increased actuation and energy harvesting.
Pull-in instability often occurs when a film of a dielectric elastomer is subjected to an electric field. In this work, we concoct a set of simple, experimentally implementable, conditions that render the dielectric elastomer film impervious to pull-in instability for all practical loading conditions. We show that a uniaxially pre-stretched film has a significantly large actuation stretch in th...
متن کاملOn designing dielectric elastomer actuators
Subject to a voltage, a dielectric elastomer can deform substantially, making it a desirable material for actuators. Designing such an actuator, however, has been challenging due to nonlinear equations of state, as well as multiple modes of failure, parameters of design, and measures of performance. This paper explores these issues, using a spring-roll actuator as an example. We formulate the e...
متن کاملHigh-performance electromechanical transduction using laterally-constrained dielectric elastomers part I: Actuation processes
A dielectric elastomer transducer is a deformable capacitor, and is under development as a sensor, actuator, or generator. Among various geometric configurations, laterallyconstrained transducer, also known as pure-shear transducer, is easy to implement and effective to couple mechanical force and electrical voltage. This analytical study reveals that lateral pre-stretch enhances actuation, far...
متن کاملModeling of a Dielectric Elastomer Bender Actuator
The current smallest self-contained modular robot uses a shape memory alloy, which is inherently inefficient, slow and difficult to control. We present the design, fabrication and demonstration of a module based on dielectric elastomer actuation. The module uses a pair of bowtie dielectric elastomer actuators in an agonist-antagonist configuration and is seven times smaller than previously demo...
متن کاملUse of aligned fibers to enhance the performance of dielectric elastomer inchworm robots
Inchworm based on the voltage actuation of dielectric elastomer actuators (DEAs) are amongst the simplest types of robots. We demonstrate a proof-of-concept inchworm robot that incorporates a few aligned fibers to suppress undesirable actuator bulging and more effectively convert the bending of a dielectric elastomer unimorph to forward motion. Finite element modeling confirms the role of the f...
متن کامل