Mechanochemical Synthesis and Characterisation of Bismuth-Niobium Oxide Ion Conductors
نویسندگان
چکیده
Bismuth niobate solid solutions, BixNbOδ (2.5 ≤ x ≤ 6), have been prepared using a mechanochemical method. The solid solutions were also prepared using a solidstate conventional method for comparison purposes. Bi3NbO7 was successfully obtained via a mechanochemical method at a lower synthesis temperature (milled at 1000 rpm for one hour followed by heating at 700C for 24 h) than the conventional solid-state method. Electrical properties of the single-phase materials were studied by AC impedance spectroscopy. Further characterization of the materials was carried out using differential thermal analysis (DTA) and thermogravimetric analysis (TGA). The results showed that no thermal changes and phase transitions were observed and all materials were thermally stable.
منابع مشابه
Investigation the Effect of Niobium Oxide Additive on the Dielectric Properties of Bismuth Titanate
Bismuth titanate ceramic has been attracted as a lead-free ferroelectric due to its high Curie temperature in high temperature applications as well as high frequency applications. In this study, the effect of niobium oxide as an additive on the microstructure and dielectric properties of bismuth titanate ceramic was investigated. For this purpose, niobium oxide was added to bismuth titanate, sy...
متن کاملGreen synthesis and characterization of bismuth oxide nanoparticle using mentha pulegium extract
In recent years, green synthesis of nanoparticles has attracted a great attention because of medicine and biological applications. In this work, bismuth oxide nanoparticles (Bi2O3 NP) was prepared via green synthesis using mentha pulegium aqueous extract after 24 h at 90°C. The product was characterized by ultraviolet-visible (UV-VIS) spectrophotometer, Fourier transform infrared (FTIR), X-ray ...
متن کاملGreen synthesis and characterization of bismuth oxide nanoparticle using mentha pulegium extract
In recent years, green synthesis of nanoparticles has attracted a great attention because of medicine and biological applications. In this work, bismuth oxide nanoparticles (Bi2O3 NP) was prepared via green synthesis using mentha pulegium aqueous extract after 24 h at 90°C. The product was characterized by ultraviolet-visible (UV-VIS) spectrophotometer, Fourier transform infrared (FTIR), X-ray ...
متن کاملSynthesis, Characterisation and Flocculation Properties of Carboxymethyl Cellulose-g Acrylamide
Graft copolymers of acrylamide on carboxymethyl cellulose (d.s 0.4-0.5) were prepared by the use of ceric ion, ceric ion/reductant molecule initiator systems in aqueous medium. The graft copolymers were characterized by IR spectroscopy. The extent of graft copolymerisation was measured in terms of grafted chains as a function of both ceric ion and ceric ion/reductant molecule concentrations. It...
متن کاملFacile synthesis of copper oxide nanoparticles using copper hydroxide by mechanochemical process
A facile mechanochemical-based method for synthesis of copper oxide (CuO) nanoparticles is here by introduced. For this purpose, copper hydroxide powder was synthesized through a facile solution method (CuSO4 + 2 Na(OH) → Cu(OH)2 + Na2SO4) after which milling of as-prepared Cu(OH)2 precursor and NaCl resulted in the mechanochemical dehydration of Cu(OH)2 and dispersion of CuO nanoparticles into...
متن کامل