Electron Gun Technology
نویسندگان
چکیده
منابع مشابه
اندازهگیریهای ماکروی کم توان بر روی نمونه اولیه تفنگ الکترونی بسامدرادیویی چشمه نور ایران
In this paper, we introduce RF electron gun of Iranian Light Source Facility (ILSF) pre-injection system. Design, fabrication and low-power microwave tests results of the prototype RF electron gun have been described in detail. This paper also explains the tuning procedure of the prototype RF electron gun to the desired resonant frequency. The outcomes of this project brighten the path to the f...
متن کاملElectron Gun Beam Extraction with Mosfets
Electron beams with an energy range of 10keV at 2A requiring intensity modulation with bandwidth from 50kHz 7.5MHz pose an interesting problem to the RF designer. Driving the extraction electrode of an electron gun can be a challenge with these requirements. The straight forward approach is the construction of a vacuum tube, single ended amplifier capable of delivering the anode voltage to the ...
متن کاملNanotip electron gun for the scanning electron microscope.
Experimental nanotips have shown significant improvement in the resolution performance of a cold field emission scanning electron microscope (SEM). Nanotip electron sources are very sharp electron emitter tips used as a replacement for the conventional tungsten field emission (FE) electron sources. Nanotips offer higher brightness and smaller electron source size. An electron microscope equippe...
متن کاملEffects of Electron-Gun and Laser Parameters on Collection Efficiency and Packet Duration in Ultrafast Electron Microscopy
Real-space imaging of full-morphological, angstrom-scale structural dynamics occurring on the femtosecond (fs) timescale is possible with ultrafast electron microscopy (UEM) via the stroboscopic pump-probe methodology enabled by interfacing an otherwise standard TEM with a short-pulsed laser system [1-3]. The technology has matured to the point that commercial systems, such as the FEI Tecnai Fe...
متن کاملSummary, Working Group 1: Electron guns and injector designs
We summarize the proceedings of Working Group 1 of the 2005 Energy Recovery Linac (ERL) Workshop. The subject of this working group, the electron gun and injector design, is arguably the most critical part of the ERL as it determines the ultimate performance of this type of accelerators. Working Group 1 dealt with a variety of subjects: The technology of DC, normal-conducting RF and superconduc...
متن کامل