Finite Element Analysis on Crane Girder with Variable Cross Sections Based on ANSYS
نویسندگان
چکیده
To the 36 meters crane girder with trapezoidal variable cross-section in a steel plant, finite element model is established reasonably according its actual size. The calculation of crane girder structure was introduced by using the finite element analysis software ANSYS. The local stress state of the cross-section is investigated and the stress concentration position of variable cross-section is found, which can provide a theoretical basis for the establishment of monitoring system. At the same time, the former 6 natural frequencies and the corresponding vibration patterns of the crane beam are extracted in modal analysis of crane girder, which is to provide a basis and reference for the structure design of crane girder. Copyright © 2013 IFSA.
منابع مشابه
Unconventional Bearing Capacity Analysis and Optimization of Multicell Box Girders
This study deals with unconventional bearing capacity analysis and the procedure of optimizing a two-cell box girder. The generalized model which enables the local stress-strain analysis of multicell girders was developed based on the principle of cross-sectional decomposition. The applied methodology is verified using the experimental data (Djelosevic et al., 2012) for traditionally formed box...
متن کاملAnti-fatigue Performance Analysis on Steel Crane Beam
Loads and working conditions of the trapezoidal cross-section of 36 m span crane beam can be analyzed by finite element method. Firstly, analysis of the stress and deformation is completed under the dangerous condition of crane beam based on the ANSYS software; secondly, find out the stress concentration and fatigue crack sensitive area of the bearing; finally, capture the position of fatigue c...
متن کاملAccurate Stress Analysis on Steel Box Girder of Long Span Suspension Bridges Based on Multi-Scale Submodeling Method
The streamline flat steel box girder is broadly used in long span cablesupported bridges all over the world. As one of the most important part of the bridges, its stress level and distribution under various dynamic loads are especially concerned. However, it is difficult to obtain the accurate stress of the steel box girder by common finite element (FE) calculation. The Runyang Suspension Bridg...
متن کاملExperimental and finite-element free vibration analysis and artificial neural network based on multi-crack diagnosis of non-uniform cross-section beam
Crack identification is a very important issue in mechanical systems, because it is a damage that if develops may cause catastrophic failure. In the first part of this research, modal analysis of a multi-cracked variable cross-section beam is done using finite element method. Then, the obtained results are validated usingthe results of experimental modal analysis tests. In the next part, a nove...
متن کاملL-Type Gantry Crane’s System Based on BP Network and Genetic Algorithm
A kind of parametric finite element analysis system for the L type gantry crane’s gate frame is developed by making use of the secondary development on the platform of ANSYS, MATLAB through VC++ programming. The interface technology of VC++, ANSYS, and MATLAB is employed as well as the encapsulation on APDL. To input parameter in the VC++ and to calculate the quality of the L type gantry crane ...
متن کامل