Photoacoustic characterization of the mechanical properties of thin films
نویسندگان
چکیده
Narrow band photoacoustics ~laser ultrasonics! are used to characterize the properties of free-standing nanometer-sized thin films. Photoacoustic generation is achieved by use of a microchip laser which deposits pulsed laser energy in the form of a spatially periodic source on the structure. The resulting narrow band ultrasonic modes are monitored using a Michelson interferometer. By varying the geometry of the spatially periodic source, a wide range of acoustic wave numbers is probed. Results are presented for two-layer thin film aluminum/silicon-nitride (Al/Si3N4) membranes. For such thin films, only the two lowest order guided modes are generated and these in turn can be related to sheet and flexural modes in plates. The mechanical properties and residual stress in the thin films are evaluated from measured acoustic dispersion curves for these two lowest order modes. © 2002 American Institute of Physics. @DOI: 10.1063/1.1434303#
منابع مشابه
Mechanical Properties and Microstructural Evolution of Ta/TaNx Double Layer Thin Films Deposited by Magnetron Sputtering
Crystalline tantalum thin films of about 500nm thickness were deposited on AISI 316L stainless steel substrate using magnetron sputtering. To investigate the nano-mechanical properties of tantalum films, deposition was performed at two temperatures (25°C and 200°C) on TaNx intermediate layer with different N2/Ar flow rate ratio from 0 to 30%. Nano-indentation was performed to obtain the mechani...
متن کاملAtomic Simulation of Temperature Effect on the Mechanical Properties of Thin Films
The molecular dynamic technique was used to simulate the nano-indentation test on the thin films of silver, titanium, aluminum and copper which were coated on the silicone substrate. The mechanical properties of the selected thin films were studied in terms of the temperature. The temperature was changed from 193 K to 793 K with an increment of 100 K. To investigate the effect of temperature on...
متن کاملPreparation and Characterization of Aluminum Nitride Thin Films with the Potential Application in Electro-Acoustic Devices
In this work, aluminum nitride (AlN) thin films with different thicknesses were deposited on quartz and silicon substrates using single ion beam sputtering technique. The physical and chemical properties of prepared films were investigated by different characterization technique. X-ray diffraction (XRD) spectra revealed that all of the deposited films have an amorphous str...
متن کاملInvestigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting
In this study various yttria doped zirconia based thin films were prepared by the aqueous tape casting method. The rheological property of the paste was studies. The phase content and microstructure of the samples was investigated by X-ray diffraction and scanning electron microscope, respectively. The mechanical properties of thin films were studied by Vickers microhardness and nanoindentatio...
متن کاملAl Doped ZnO Thin Films; Preparation and Characterization
ZnO is a promising material suitable for variety of novel electronic applications including sensors, transistors, and solar cells. Intrinsic ZnO film has inferiority in terms of electronic properties, which has prompted researches and investigations on doped ZnO films in order to improve its electronic properties. In this work, aluminum (Al) doped ZnO (AZO) with various concentrations and undop...
متن کامل