Interactions of electrical fields with fluids: laboratory-on-a-chip applications.

نویسنده

  • J Wu
چکیده

The area of 'laboratory-on-a-chip', miniaturised or microfluidic analysis systems, is a rapidly developing field. At the microscale, electrokinetic processes become enhanced, and the advent of AC electrokinetics (EK) in recent years further promotes the development of electrokinetic devices for microfluidics. ACEK has demonstrated to manipulate fluids and polarisable particles at low voltages without some of the disadvantages from DCEK, such as electrochemical reactions and the limitation of low ionic strength fluids. The three major mechanisms of ACEK, that is, dielectrophoresis, AC electro-osmosis and AC electrothermal effect, provide versatility and flexibility to interface with many current methods and technologies in multiple biological, chemical and physical disciplines. This paper gives an overview of ACEK and its applications, with an emphasis on fluid manipulation by electric fields.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Chip Formation Process using Finite Element Simulation “Influence of Cutting Speed Variation”

The main aim of this paper is to study the material removal phenomenon using the finite element method (FEM) analysis for orthogonal cutting, and the impact of cutting speed variation on the chip formation, stress and plastic deformation. We have explored different constitutive models describing the tool-workpiece interaction. The Johnson-Cook constitutive model with damage initiation and damag...

متن کامل

Advances of LOC-Based Particle Manipulation by AC Electrical Fields

This article presents recent patents and advances on electrical methods for particle manipulation in a microfluidic environment. At microscale, electric fields have unique advantages in performing analytical functions such as manipulation of biological molecules and cells. The advent of AC electrokinetics in recent years further promotes the development of laboratory on a chip, providing versat...

متن کامل

Optimization of Material Removal Rate in Electrical Discharge Machining Alloy on DIN1.2080 with the Neural Network and Genetic Algorithm

Electrical discharge machining process is one of the most Applicable methods in Non-traditional machining for Machining chip in Conduct electricity Piece that reaching to the Pieces that have good quality and high rate of machining chip is very important. Due to the rapid and widespread use of alloy DIN1.2080 in different industry such as Molding, lathe tools, reamer, broaching, cutting guillot...

متن کامل

Geomechanical Sanding Prediction in Oil Fields by Wellbore Stability Charts

Sand production is a universally encountered issue during the exploration of unconsolidated sandstone reservoirs particularly during production. The production of sand particles with the reservoir fluids depends on the stress around a wellbore and the properties of the reservoir rocks and fluids. Therefore, it is crucial to predict under what production conditions sanding will occur and when sa...

متن کامل

Design of a Fuzzy Controller Chip with New Structure, Supporting Rational-Powered Membership Functions

In this paper, a new structure possessing the advantages of low-power consumption, less hardware and high-speed is proposed for fuzzy controller. The maximum output delay for general fuzzy logic controllers (FLC) is about 86 ns corresponding to 11.63 MFLIPS (fuzzy logic inference per second) while this amount of the delay in the designed fuzzy controller becomes 52ns that corresponds to 19.23 M...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • IET nanobiotechnology

دوره 2 1  شماره 

صفحات  -

تاریخ انتشار 2008