Direct mechanical measurement of the tensile strength and elastic modulus of multiwalled carbon nanotubes

We have conducted pulling and bending tests on individual carbon nanotubes in-situ in a transition electron microscope. Based on our observation of the force required to break the tube, a tensile strength of 0.15 TPa was computed. From corresponding bending studies on such nanotubes, the Young’s modulus was estimated to be 0.9 TPa (0.8 TPa after ‘sub continuum’ corrections). These results suggest a strength that is a large fraction of the elastic modulus, although previous measurements of their elastic stiffness have yielded higher modulus values, by as much as a factor of 2. The result does indicate that individual nanotubes can fail as essentially defect-free materials. Furthermore, we observed no obvious reduction in cross-sectional area prior to the failure. In addition, the bending experiments revealed a remarkable flexibility in these tubes. These unique properties support the potential of nanotubes as reinforcement fibers in structural materials. © 2002 Elsevier Science B.V. All rights reserved.