Rate Sensitive Behavior of Cement Paste and Mortar in Compression
نویسنده
چکیده
منابع مشابه
Effects of Pozzolanic Admixture (Waste Bricks) on Mechanical Response of Mortar
This work presents an experimental study realized at the materials laboratory of the University of M’sila. It consists to vary the percentage of the pozzolanic admixture (waste bricks) in cement by the substitution method (partial replacement of the clinker by the calcined clay). The characteristics of cement at anhydrous state and the hydrated state (chemical composition, specific weight and f...
متن کاملOil Palm Shell Ash - Cement Mortar Mixture and Modification of Mechanical Properties
The waste agriculture materials cause environment pollution, recycle of these materials help sustainable development. This study focused on the impact of used oil palm shell ash on the compressive and flexural strengths of cement mortar. Two different cement mortar mixes have been designed to investigate the impact of oil palm shell ash on strengths of cement mortar. Quantity of 4% oil palm she...
متن کاملEffects of Sand and Silica Fume on the Vibration Damping Behavior of Cement
The addition of sand to cement paste was found to degrade the vibration damping ability, as shown by decreases in both loss tangent and storage modulus under flexure. However, further addition of silica fume more than restored the vibration damping ability, due to the silica fume causing increases in both loss tangent and storage modulus. Silica fume increased the loss modulus of mortar by as m...
متن کاملEffect of Styrene–Butadiene Rubber Latex on Mechanical Properties of Cementitious Materials Highlighted by Means of Nanoindentation
In this paper, micro-mechanical properties of styrene–butadiene rubber (SBR) latexmodified cement pastes identified by means of the nanoindentation (NI) technique are related to macro-mechanical properties of SBR latex-modified mortars obtained from standard test methods, considering an SBR latex/cement ratio varying from 0% to 20%. For this purpose, the average value of the hardness and the so...
متن کاملUpscaling Cement Paste Microstructure to Obtain the Fracture, Shear, and Elastic Concrete Mechanical LDPM Parameters
Modeling the complex behavior of concrete for a specific mixture is a challenging task, as it requires bridging the cement scale and the concrete scale. We describe a multiscale analysis procedure for the modeling of concrete structures, in which material properties at the macro scale are evaluated based on lower scales. Concrete may be viewed over a range of scale sizes, from the atomic scale ...
متن کامل