Acoustic Emission Application for Monitoring Bearing Defects
نویسندگان
چکیده
منابع مشابه
Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type
Composites have been widely used in the aerospace industry. Due to the requirement of a high safety for such structures, they could be considered for health monitoring. The acoustic emission approach is one of most effective methods for identifying damages in composites. In this article, standard specimens were made from carbon fibers and the epoxy resin, with the [03/902/...
متن کاملDetecting the onset, propagation and location of non-artificial defects in a slow rotating thrust bearing with acoustic emission
Acoustic emission (AE) is defined as the phenomenon whereby transient elastic waves are generated by the rapid release of energy from localised sources within a material[1]; typical frequency content of AE is between 100 kHz to 1 MHz. The high sensitivity of AE in detecting the loss of mechanical integrity, as compared to the well-established vibration monitoring technique, has become its princ...
متن کاملThe use of Acoustic Emission for bearing defect identification and estimation of defect size
Vibration monitoring of rolling element bearings is possibly the most established diagnostic technique for rotating machinery. The application of Acoustic Emission (AE) for bearing diagnosis is gaining ground as a complementary diagnostic tool; however, limitations in the successful application of the AE technique have been partly due to the difficulty in processing, interpreting and classifyin...
متن کاملCluster Analysis of Acoustic Emission Signals for Carbon/Epoxy Composite in Four-point Bending Test (RESEARCH NOTE)
Due to the extensive use of composites in various industries and the fact that defects reduce ultimate strength and efficiency during operation, detection of failures in composite parts is very important. The aim of this paper is to use Acoustic Emission (AE) non-destructive method in four-point bending test of carbon/epoxy composite to analyze and examine the failure mechanisms. This method is...
متن کاملFlexural monitoring of carbon fiber/epoxy composite by acoustic emission
Carbon / epoxy composite is one of the most useful polymer matrix composites that has special properties such as high strength-to-weight ratio, high hardness, high corrosion resistance, Resistance to nuclear radiation has high consumption in different industries such as aerospace industry. Therefor monitoring of loading of this type of composite is important. In order to determine failure mecha...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017