A Framework to Generate Accurate and Complete As-built Bims Based on Progressive Laser Scans
نویسندگان
چکیده
It is a general expectancy that in most of the construction and renovation project, the contractor is going to hand over the as-built documents to the owner or the facility management team at the completion of the project. The main challenge for the handover process is to ensure the completeness of the captured building information and the accuracy of it in terms of how well it represents the reality. Building information models (BIMs) can be used as an information repository to store and deliver as-built information. However, due to changes made in the construction and renovation phases and errors made in the design and modeling phases, discrepancies can exist between BIMs created in the design phase (asdesigned BIMs) and actual building conditions. Laser scanning technology is able to efficiently capture accurate geometric information, which provides an opportunity to identify and quantify discrepancies and update as-designed BIMs into as-built BIMs. This paper presents a case study, within which the asdesigned BIM of a newly renovated research lab was updated into an as-built BIM using laser scanned data captured in the renovation phase. This paper introduces the challenges associated with the updating process for the as-designed BIM. In order to address these challenges, this paper introduces a framework that supports the update of an as-designed BIM by incorporating point clouds captured by the progressive laser scans.
منابع مشابه
Constructing A Complete And Accurate As-Built BIM Based On An As-Designed BIM And Progressive Laser Scans
متن کامل
Representation Requirements of As-is Building Information Models Generated Fromlaser Scanned Point Cloud Data
Obtaining and utilizing as-is information with 3D imaging technologies, such as laser scanners, during various phases of facility life-cycle is becoming common practice. Both during construction and facility operations information derived from laser scanner data can serve many purposes by providing accurate information about the conditions of the facilities at the time of the scanning. Currentl...
متن کاملMethods for Automatically Modeling and Representing As-built Building Information Models
Laser scanners are increasingly being used to create information rich 3D models of the as-built or asis conditions of buildings, infrastructure, and other facilities. These “as-built” Building Information Models (BIMs) are created through a time-consuming and error-prone manual process, which is one key barrier to widespread use of as-built BIMs in industry. This paper outlines our research gro...
متن کاملMapping the Structural Frame of a Damaged Reinforced Concrete Building using As-Damaged Scans and As-Built BIM
After an earthquake, Terrestrial Laser Scanning (TLS) can capture point clouds of the damaged state of building facades rapidly, remotely and accurately. A long-term research effort aims to develop applications that can reconstruct ‘as-damaged’ BIM models of reinforced concrete (RC) framed buildings based on ‘as-built’ BIMs and scans of ‘asdamaged’ states. This paper focuses on a crucial step: ...
متن کاملA novel method for locating the local terrestrial laser scans in a global aerial point cloud
In addition to the heterogeneity of aerial and terrestrial views, the small scale terrestrial point clouds are hardly comparable with large scale and overhead aerial point clouds. A hierarchical method is proposed for automatic locating of terrestrial scans in aerial point cloud. The proposed method begins with detecting the candidate positions for the deployment of the terrestrial laser scanne...
متن کامل