Oxidation Kinetics and Oxygen Capacity of Ti-Bearing Blast Furnace Slag under Dynamic Oxidation Conditions
نویسندگان
چکیده
Li Zhang 1,*, Wu Zhang 2, Juhua Zhang 3 and Guangqiang Li 3 1 School of Materials and Metallurgy, Northeastern University, Shenyang 110819, China 2 School of Materials Science and Engineering, Shenyang Ligong University, Shenyang 110168, China; [email protected] 3 The State Key Laboratory of Refractories and Metallurgy, Wuhan University of Science and Technology, Wuhan 430081, China; [email protected] (J.Z.); [email protected] (G.L.) * Correspondence: [email protected]; Tel./Fax: +86-24-8367-0465
منابع مشابه
PROCESSING OF TiO2 FROM TITANIUM-BEARING BLAST FURNACE SLAG AS TITANIUM SOURCE
X. Li, H.H. Yu, Z. H. Fang, Z. G. Yuan, School of Material Science and Engineering, Shenyang Ligong University, Shenyang, China; X. X. Xue, School of Material and Metalurgy, Northeastern University, Shenyang, China The titanium dioxide(TiO2) was prepared by efficient decomposition of titaniumbearing blast furnace slag (TBBFS) in molten salt system. The as-prepared TiO2 were characterized by X-r...
متن کاملEffect of aging on Phosphorus removal of metallurgical slag and heat reactivation of aged slag
In order to examine the effect of ageing on P removal capacity, the phosphorus (P) removal capacity of three types of slag, argon oxygen decarburisation slag (AOD), blast furnace slag (BFS) and electric arc furnace slag (EAF), was examined after 0, 10, 13 and 19 months in batch experiments. The results showed that ageing reduced P removal capacity, e.g. by 78.4% for 19-month-old AOD slag. For B...
متن کاملTechnical Effects of Air Cooled Blast Furnace Slag on Asphalt Mixtures
Air cooled blast furnace slag is a by product made of gradually air cooled molten blast furnace slag and is often stored in stockpiles near the iron mills and usually occupy a wide area around the iron mills. From this perspective the further use of these materials can have its own merits. Air cooled blast furnace slag can be used in asphalt mixtures because of their proper frictional propertie...
متن کاملPrevention of Sulfide Oxidation in Waste Rock using By-products and Industrial Remnants, a Suitability Study
Prevention and mitigation of acid rock drainage from mining are decisive for limiting environmental impact. Five by-products and industrial remnants (lime kiln dust, blast furnace slag, granulated blast furnace slag, cement kiln dust and fly ash) were investigated for their suitability to prevent acidity and metal(loid)s during leaching from highly sulfidic (50wt%, sulfide) waste rock in small ...
متن کاملReduction of Costs of Iron Production by Changing Parameters of the Mixed Blast-furnace Wind
The blast-furnace process consists of a large number of processes that are physicochemical, thermal and mechanical interconnected processes. In addition to main processes consisting of iron oxides reduction, pig iron and slag melt creation, also realised are fuel combustion, gas flow, charge and melt flow, dissociation and other reactions in the solid and liquid phases. Inputs to the blast-furn...
متن کامل