Motion control and data capturing for laser scanning with an industrial robot
نویسندگان
چکیده
Reverse engineering is concerned with the problem of creating computer aided design (CAD) models of real objects by interpreting point data measured from their surfaces. For complex objects, it is important that the measuring device is free to move along arbitrary paths and make its measurements from suitable directions. This paper shows how a standard industrial robot with a laser profile scanner can be used to achieve that freedom. The system is planned to be part of a future automatic system for the Reverse Engineering of unknown objects. c © 2006 Elsevier B.V. All rights reserved.
منابع مشابه
Mobile Robot Online Motion Planning Using Generalized Voronoi Graphs
In this paper, a new online robot motion planner is developed for systematically exploring unknown environ¬ments by intelligent mobile robots in real-time applications. The algorithm takes advantage of sensory data to find an obstacle-free start-to-goal path. It does so by online calculation of the Generalized Voronoi Graph (GVG) of the free space, and utilizing a combination of depth-first an...
متن کاملTrajectory Optimization of Cable Parallel Manipulators in Point-to-Point Motion
Planning robot trajectory is a complex task that plays a significant role in design and application of robots in task space. The problem is formulated as a trajectory optimization problem which is fundamentally a constrained nonlinear optimization problem. Open-loop optimal control method is proposed as an approach for trajectory optimization of cable parallel manipulator for a given two-end-po...
متن کاملDirect Optimal Motion Planning for Omni-directional Mobile Robots under Limitation on Velocity and Acceleration
This paper describes a low computational direct approach for optimal motion planning and obstacle avoidance of Omni-directional mobile robots within velocity and acceleration constraints on the robot motion. The main purpose of this problem is the minimization of a quadratic cost function while limitation on velocity and acceleration of robot is considered and collision with any obstacle in the...
متن کاملPath Planning and Control of an Industrial Robot Used for Opening Tap Hole of an Electric Arc Furnace
The electric arc furnace (EAF) is one of the popular methods of steel production from steel scraps. The plasma arc is used in EAF to generate heat for melting scarp or direct reduced iron (DRI). The liquid metal is drained from the EAF through the tap hole. Nowadays, it is critical to use Automated/robotic tools for opening the tap hole with oxygen lancing. Because many workers have been blinde...
متن کاملDesign and Performance Tests of a Mobile Mechanical Manipulator
Mobile mechanical manipulators are one of the automation aspects which were revealed in last years of twentieth century. These machines assume the responsibility of human and gradually expand the domain of their activities in industry. This paper is a presentation of the Sweeper Robot designed in the Robotic Laboratory of Iran University of Science and Technology. The original design of this ro...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Robotics and Autonomous Systems
دوره 54 شماره
صفحات -
تاریخ انتشار 2006