Fabrication and release behavior of a novel freeze-gelled chitosan/gamma-PGA scaffold as a carrier for rhBMP-2.

نویسندگان

  • Chieh-Yang Hsieh
  • Hsyue-Jen Hsieh
  • Hwa-Chuang Liu
  • Da-Ming Wang
  • Lein-Tuan Hou
چکیده

OBJECTIVE The aim of this study was to fabricate a novel composite porous scaffold by blending chitosan and gamma-poly(glutamic acid) (gamma-PGA) for the sustained delivery of rhBMP-2. METHODS Chitosan and gamma-PGA were blended to fabricate a novel porous scaffold by the freeze-gelation method. For comparison, scaffolds made of freeze-dried chitosan, freeze-dried PLLA, and freeze-gelled chitosan were also prepared. The scaffolds were loaded with rhBMP-2, and then the controlled release of rhBMP-2 from the scaffolds was assessed by ELISA. RESULTS The freeze-gelled chitosan/gamma-PGA scaffold (M0=318.29 ng, k=0.32 d(-1)) gave the most satisfactory release curve, followed by the freeze-gelled chitosan (M0=392.76 ng, k=0.59 d(-1)), freeze-dried chitosan (M0=229.21 ng, k=2.28 d(-1)), and freeze-dried PLLA (M0=8.4 ng, k=482.54 d(-1)) scaffolds. In the stability test, p-dioxane (the solvent for PLLA) seriously deteriorated rhBMP-2, whereas acetic acid (the solvent for chitosan) did not. SIGNIFICANCE A novel chitosan/gamma-PGA composite scaffold for the controlled release of rhBMP-2 was established, with an enhanced release amount and sustained release behavior. This scaffold has many potential applications in bone regenerative therapies.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Fabrication of Chitosan Silk-based Tracheal Scaffold Using Freeze-Casting Method

Background: Since the treatments of long tracheal lesions are associated with some limitations, tissue engineered trachea is considered as an alternative option. This study aimed at preparing a composite scaffold, based on natural and synthetic materials for tracheal tissue engineering. Methods: Nine chitosan silk-based scaffolds were fabricated using three freezing rates (0.5, 1, and 2°C/m...

متن کامل

Fabrication of novel tubular scaffold for tendon repair from chitosan in combination with zinc nanoparticles

Chitosan bears numerous properties, such as biocompatibility, biodegradability and non-toxicity making it suitable for use in different biomedical fields. Zinc (Zn) is required for fibroblasts proliferation and collagen synthesis as essential elements of wound healing. Its nanoparticles are well known for their capability to enhance wound healing by cell adhesion and migration improvement throu...

متن کامل

Long-term controlled delivery of rhBMP-2 from collagen-hydroxyapatite scaffolds for superior bone tissue regeneration.

The clinical utilization of recombinant human bone morphogenetic protein 2 (rhBMP-2) delivery systems for bone regeneration has been associated with very severe side effects, which are due to the non-controlled and non-targeted delivery of the growth factor from its collagen sponge carrier post-implantation which necessitates supraphysiological doses. However, rhBMP-2 presents outstanding regen...

متن کامل

Various parameters in the preparation of chitosan/polyethylene oxide electrospun nanofibers containing Aloe vera extract for medical applications

Objective(s): The present study aimed to fabricate chitosan/polyethylene oxide (CS/PEO) electrospun nanofibers loaded with Aloe vera extract for biomedical applications. The polymer-to-extract ratio and electrospinning parameters (applied voltage and nozzle-to-collector distance) were evaluated in order to optimize the process of nanofiber fabrication. Materials and Methods: The character...

متن کامل

Fabrication of Silk Scaffold Containing Simvastatin-Loaded Silk Fibroin Nanoparticles for Regenerating Bone Defects

Background: In the present study, a tissue engineered silk fibroin (SF) scaffold containing simvastatin-loaded silk fibroin nanoparticles (SFNPs) were used to stimulate the regeneration of the defected bone. Methods: At first, the porous SF scaffold was prepared using freeze-drying. Then simvastatin-loaded SFNPs were made by dissolvation method and embedded in the SF scaffold. Afterwards, the ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Dental materials : official publication of the Academy of Dental Materials

دوره 22 7  شماره 

صفحات  -

تاریخ انتشار 2006