Low-cost Ultra High Isolation SPDT Switch
ثبت نشده
چکیده
Wide-band test instrumentation often needs signal routing. This is accomplished with mechanical switches, which are expensive and slow. When isolation requirements are not high, it is also done with electronic switches. Some high isolation switches available in the market are very expensive. Mini-Circuits has developed a pair of low-cost, high isolation, fast switching, TTL-driven, connectorized-switches that have a typical isolation of 85 dB at 1 GHz and 60 dB at 5 GHz. Two versions, absorptive and reflective have been introduced. This paper will describe these DC-5 GHz high isolation switches and a typical application.
منابع مشابه
DC–35 GHz low-loss MMIC switch using 50 nm gate-length MHEMT technology for ultra-low-power applications
A broadband low-loss, ultra-low-power consumption transmit/receive switch using high-performance 50 nm gate-length metamorphic high electron mobility transistors (MHEMTs) is presented. The single pole double throw (SPDT) monolithic switch utilises a drain contact electrode sharing concept using a two-finger MHEMT. An optimal gate width of the MHEMT was chosen for low-loss, high-isolation perfor...
متن کامل2.3 A 130-to-180GHz 0.0035mm2 SPDT switch with 3.3dB loss and 23.7dB isolation in 65nm bulk CMOS
Single-pole double-throw (SPDT) switches are a key building block for enabling transceiver time-division duplexing (TDD) when operated as a T/R switch or for eliminating imager fluctuations when operated as a Dicke switch. To provide acceptable compromises of NF, Pout and sensitivity in transceivers or imagers, the switches are required to feature an insertion loss of ~3dB and an isolation of ~...
متن کاملDesign and fabrication of a single membrane push-pull SPDT RF MEMS switch
In this paper, we report a new push-pull-type SPDT (single pole double throw) switch actuated by the combination of electromagnetic and electrostatic forces for low power and low voltage operation. The switch is initially actuated by large electromagnetic force to change its state and is held to maintain its state by applying electrostatic force to reduce static power consumption. The electroma...
متن کاملCmos spdt switch for wlan applications
WLAN has become an essential part of our today’s life. The advancement of CMOS technology let the researchers contribute low power, size and cost effective WLAN devices. This paper proposes a single pole double through transmit/receive (T/R) switch for WLAN applications in 0.13 μm CMOS technology. The proposed switch exhibit 1.36 dB insertion loss, 25.3 dB isolation and 24.3 dBm power handling ...
متن کاملHighly integrated CMOS RF SPDT switch with ESD and unit cell optimisation in MCM
Presented is the performance of a highly integrated RF single-pole double-throw (SPDT) switch fabricated in a 0.18 μm bulk CMOS process and housed in a low-cost laminated multi-chip module (MCML) package. A switch controller is also implemented and consumes ∼40 μA from a 3.4 V supply. The switch, based upon the 1.8 V thinoxide devices with resistive body-floating and unit cell layout optimisati...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2001