Nanoporous walls on macroporous foam: rational design of electrodes to push areal pseudocapacitance.

Supercapacitors, also known as electrochemical capacitors, are considered the most promising energy storage devices owing to their high power densities and long lifespan. [ 3–5 ] The fast charge and discharge capability make supercapacitors favorable for applications in hybrid vehicles, portable electronics, and backup energy systems. [ 6–10 ] Carbonaceous materials, including carbon nanotubes and graphene, are being widely studied as alternatives to conventional graphites. [ 2 , 11–14 ] However, carbon-based materials usually show low energy density as they store charges electrostatically at their surfaces, so they have intrinsically low specifi c areal capacitance ( C a ) in the range of 10 − 40 μ F cm − 2 . Transition metal oxides/hydroxides store charges with surface faradaic (redox) reactions, which enable higher energy density compared to carbon. Metal oxides/hydroxides such as MnO 2 , NiO, Ni(OH) 2 , CoO x and their compounds have recently come into focus in the design of high-energy-density charge-storage materials. [ 15–27 ] Despite these efforts, practical energy storage applications still require higher specifi c capacitance. One way out is to design nanometer-scale electrode materials with very large surface areas and structural stability. In this context, porous nanostructures are of great interest because they can reduce ionic and electronic diffusion distance and provide large electrode/electrolyte contact area. For example, porous Ni and Au electrodes as current collectors have recently been reported, which signifi cantly improve the specifi c capacitance when covered with the pseudoactive material MnO 2 . [ 28 , 29 ] Also, nanoporous graphene electrodes with ∼ 4 nm pores drastically enhance the specifi c capacitance up to 166 F g − 1 . [ 30 ] For metal oxides,