Hot-Filament Chemical Vapor Deposition of Organosilicon Thin Films from Hexamethylcyclotrisiloxane and Octamethylcyclotetrasiloxane

نویسندگان

  • Hilton G. Pryce Lewis
  • Thomas B. Casserly
  • Karen K. Gleason
چکیده

A nonplasma technique, hot-filament chemical vapor deposition ~HFCVD!, is an alternative method for producing organosilicon films of novel structure. Films are deposited onto room-temperature substrates from the precursors hexamethylcyclotrisiloxane (D3) and octamethylcyclotetrasiloxane (D4) at high rates ~.1 mm/min!. Filament temperature can be used to control film structure, and the limited reaction pathways available via thermal decomposition make it possible to elucidate the chemistry of the growth process. During film growth, there appears to be competition between reaction pathways for the incorporation of cyclic and linear siloxane structures. For both D3 and D4 HFCVD films, infrared, Raman, and nuclear magnetic resonance spectroscopies indicate the incorporation of ring structures consisting of three siloxane units. The concentration of these structures increases as filament temperature is raised and is especially pronounced for films deposited from D3. In comparison, films grown from D4 show a greater degree of incorporation of linear, unstrained structures over the range of filament temperatures studied. In contrast to plasma-deposited organosilicon films, cross-linking in HFCVD films occurs predominantly via silicon-silicon bonding and not from siloxane bonds with tertiary or quaternary silicon atoms. © 2001 The Electrochemical Society. @DOI: 10.1149/1.1415723# All rights reserved.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Chemical Vapor Deposition and Functionalization of Fluorocarbon-Organosilicon Copolymer Thin Films

Neural prostheses are micron-scale integrated circuit devices that are under development for the treatment of brain and spinal cord injuries. A key challenge in the fabrication of these siliconbased devices is the protection of the electronic components from the ambient body environment. There is a need for a biopassivation coating on these devices that is chemically inert and electrically insu...

متن کامل

Optimized Conditions for Catalytic Chemical Vapor Deposition of Vertically Aligned Carbon Nanotubes

Here, we have synthesized vertically aligned carbon nanotubes (VA-CNTs), using chemical vapor deposition (CVD) method. Cobalt and ethanol are used as the catalyst and the carbon source, respectively. The effects of ethanol flow rate, thickness of Co catalyst film, and growth time on the properties of the carbon nanotube growth are investigated. The results show that the flow rate of ethanol and...

متن کامل

Polymeric Fluorocarbon Films via Hot-Filament Chemical Vapor Deposition

Hot Filament Chemical Vapor Deposition (HFCVD) offers the ability to tailor the chemistry of films with polymeric structure. In particular, HFCVD allows for more control over precursor fragmentation pathways than conventional plasma-enhanced CVD (PECVD). HFCVD uses thermal activation in the gas phase to generate reactive species, and allows independent control of the substrate temperature to be...

متن کامل

Effect of Catalyst on the Growth of Diamond-like Carbon by HFCVD

Diamond like carbon (DLC) film was grown by hot filament chemical vapor deposition (HFCVD)technique. In the present work, we investigated the quality of the DLC films groew on the substratesthat were coated with various metal nanocatalysts (Au and Ni). A combination of CH4/Ar/H2 rendersthe growth of carbon nanostructures technique (diamond like carbon). The utilized samples werecharacterized by...

متن کامل

Preparation of Cr-doped TiO2 thin film by sonochemical/CVD method and its visible light photocatalytic activity for degradation of paraoxon

In this work, nanostructured TiO2 and Cr-doped TiO2 thin films were deposited on glass substrate through sonochemical-chemical vapor deposition (CVD) method. The resulting thin films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-visible absorption spectroscopy, and photoluminescence spectroscopy techniques. The TiO2 thin film has nanocubic morphology and ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2001